Slip Bulkhead Fitting Kit (1/2 Inch) Slip Bulkhead Fitting Kit (1/2 Inch) is a complete small-size aquarium bulkhead kit for creating a watertight slip plumbing connection through an aquarium, sump, reservoir, or filtration panel. The kit includes the bulkhead fitting, gasket, lock nut, strainer, and 90 degree elbow needed for a compact installation. 1/2 Inch Slip Bulkhead Kit for Compact Installations This kit is useful for smaller returns, drains, reservoirs, utility lines, and custom filtration projects where all key bulkhead components are needed together. The 90 degree elbow helps reduce wall clearance requirements, while the included strainer can be used on the wet side to help manage intake flow. Slip Bulkhead Kit Features Complete 1/2 inch slip bulkhead fitting kit. Heavy wall PVC bulkhead for aquarium and sump plumbing. Slip connection style for compatible glued plumbing. Includes strainer for wet-side intake use. Includes 90 degree Fit x Insert elbow to reduce clearance requirements. Black finish works well in aquarium backs, sumps, reservoirs, and equipment areas. Suitable for freshwater, saltwater, reef, and filtration plumbing projects. Kit Specifications Product type: Slip bulkhead fitting kit Nominal size: 1/2 in Connection style: Slip bulkhead plumbing Material: PVC Colour: Black Required hole size: 1-1/4 in Use: Aquarium, sump, reservoir, and filtration plumbing pass-through Compatibility Notes Use with compatible 1/2 inch slip plumbing components. Confirm the required hole size before drilling and dry-fit the full assembly before gluing any slip connections. The included elbow can be used to reduce clearance behind the tank or as a directional return fitting depending on the plumbing layout. Directions for Use Drill the required hole through a clean, flat panel and smooth the edge. Place the gasket on the wet side, insert the bulkhead, and hand-tighten the lock nut from the opposite side. Install the strainer, elbow, and compatible slip plumbing as required for the setup, then allow glued joints to cure and leak-test before normal operation. What's Included 1 Slip Bulkhead Fitting (1/2 Inch) 1 rubber gasket 1 lock nut 1 90 degree Fit x Insert elbow 1 strainer Installation instructions
