the perfect size paint booth for your workbench. Accommodates figures and vehicles up to 28mm. ... but probably not the larger 40k beasts. A DIY paint booth, just add the exhaust fan of your choice and a 4" dryer vent duct and some sort of foam filter and you are ready to paint. Airbrushing booth with a 12" wide x 10 3/4" tall work area that is about 9" deep from the front to the filter. This DIY booth kit includes ONLY the following items:Laser cut MDF partsYou will need purchase a 4" dryer vent hose (length of your choice) and the exhaust fan of your choice and some thin foam to make a filter. Hose and exhaust fan are NOT included in this kit. The opening on the side of the booth is aprox 3" in diameter. If you are using a 4" dryer hose you will want to get a 3" to 4" increaser/reducer fitting. Home Depot has one that is made by Everbilt, you will see it in the photos of my booth. Leaving these options to you allows you to choose the fan you like. A Google search for 4" Inline fan will show you several options, some as low as $25.00. If you have a local hydroponics store you can find some very nice 4" inline and centrifugal "squirrel cage" type fans. Please note that any fan where the electric motor is in the airflow is not recommended for use with solvent based (flammable) paints. Choose the proper fan for the type of paint you will be using. I've heard of people using small computer type fans in booths like this, what type of fan you choose is up to you. ; The best option in my personal opinion is a 4" Squirrel Cage Fan like you will find at your local hydroponics store.
