TimmerTek Tint A natural oil and natural wax based finish for tinting wooden surfaces – floors and furniture. Application Wood surfaces must be sanded and cleaned prior to application. Application of one coat of TimmerTek Tint is normally sufficient, followed by one coat of protection (TimmerTek Hardwax Oil) in either the matt or satin finish. TimmerTek Tint is ready to use. Dilution is not necessary and likely to reduce performance and durability. Stir TimmerTek Tint well before application. Take care to apply only a thin, even layer of TimmerTek Tint or Hardwax Oil with a brush, roller or polishing pad (our recommended method of application). Wipe off any excess especially between joints. Touch dry in 24 hours, curing 3-4 days, use only socks on newly protected floors and avoid cleaning with water during this time. Excess tint should be wiped off after c.15 minutes. Safety Data Sheet Technical Data Sheet
