SCHOEPS CMIT-5 Shotgun Microphone Shotguns of Schoeps’ CMIT series combine high sound quality and high directivity. A shotgun microphone (interference tube) is a higher-order, frequency-dependent directive microphone. It achieves its directivity only from mid frequencies up, while at low frequencies it is comparable to a supercardioid. Order number 140101 CMIT-5 Shotgun microphone, incl. SG 20, W140, premium case, Order number 140102 CMIT-5 anthracite-grey, Shotgun microphone, anthracite-grey, incl. SG 20, W 140, premium case. Set including CMIT 5, anthracite-grey, Microphones: Surcharge for custom color, Order number 140102 CMIT-5 Chroma Green, Shotgun microphone, Chroma Green, incl. SG 20, W 140, premium case. Set including CMIT 5, Chroma Green, Microphones: Surcharge for custom color Technical Specifications Pickup pattern Supercardioid / lobe-shaped Frequency range 40 Hz - 20 kHz Sensitivity -35 dB (V/Pa), 18 mV/Pa Equivalent noise level (A-weighted) 13 dB Equivalent noise level (CCIR) 24 dB Signal-to-noise ratio (A-weighted) 81 dB Maximum sound pressure level (THD < 0.5 %) 131 dB-SPL (P48) Maximum output voltage 1.3 V (2.5 dBV) with 1 kΩ load High shelf filter switchable, +5 dB at 10 kHz Low cut filter switchable, 80 Hz, 18 dB/oct. Proximity filter switchable, 300 Hz, 6 dB/oct. Minimum recommended load impedance 1 kΩ Output impedance 50 Ω Maximum cable length > 400 m SCHOEPS RFI Shield Yes Powering standard / Valid range P48 / >34 V Current consumption 4.4 mA (P48) Common mode rejection ratio (at 1 kHz) > 65 dB Output XLR-3M, analog, 1 channel Length 251 mm Diameter 21 mm Weight 95 g Surface finish bluecustom color:anthracite gray, chromagreen
