Scalecoat S-54 Quick Dry is a performance-enhancing additive designed to improve flow, promote smooth finishes, and help coatings set up to a durable, professional-quality result. S-54 is best used in small amounts to fine-tune application behavior. It helps coatings lay down more evenly while supporting a strong, consistent finish across a wide range of hobby applications. Use S-54 Quick Dry to: Help coatings set up more efficiently Maintain a durable, consistent finish Fine-tune performance without over-thinning Application Tips: Start with small amounts and adjust as needed For best results, avoid over-application Heavier applications may affect final sheen Test on a sample surface before full use Perfect for: Model railroad painting Scale model finishing Airbrush and brush applications Designed for hobbyists who want better control, smoother results, and dependable performance from their finishing process. Additional Use: S-54 Quick Dry may also be reduced with compatible thinner (Scalecoat I Thinner) and used as a light clear coating for select applications. When thinned appropriately, it can produce a low to medium gloss finish depending on application technique and film thickness. Suitable for light protective coats and specialty finishing Final sheen will vary based on dilution and application method Lighter applications will result in lower gloss Not intended as a high-build gloss clear Curing Note: For best results, allow coatings to fully cure before heavy handling or masking. While surfaces may dry to the touch sooner, a full cure time of up to 48 hours is recommended for maximum durability and performance. For hobby and scale model use only. Use with adequate ventilation. Always test before full application.
