Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Intermediate (7/10) Set-in neck has to be aligned and glued before finishing, which is the step that most affects intonation Straightforward wiring with few connections to solder Multi-ply binding must be masked carefully when finishing Body Material: Zebrawood (Engineered) Type: Solid Cutaway: Double Binding: Multi-ply Ivory Top Veneer: None Neck Material: Maple w/ a Skunk Stripe Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628mm, 24.75" Binding: Single Ivory Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: Abalone Headstock Shape: Standard (as in product images) Binding: Multi-ply Ivory Nut: White Plastic Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 1 Volume, 1 Tone, 3-Way Selector Wiring: DIY (soldering required) Wiring Diagram: HH, 1 Volume, 1 Tone, 3-Way Switch Output Jack: Side jack Hardware Bridge: Adjustable Bridge + Stopbar Tuners: Sealed, Diecast Pickguard: None Knobs: Chrome Cavity Covers: Ivory Strings: Steel Finish: Chrome What's in the Box Angular pointed guitar body with striped grain and multi-ply edge lamination (unfinished) Guitar neck with dark striped fretboard and shell dot inlays 6x chrome sealed tuners with bushings and washers 2x humbucker pickups with black open bobbins in black mounting rings Chrome stop tailpiece Chrome bridge with six adjustable saddles 4x chrome bridge and tailpiece studs with bushings Pre-wired control harness with potentiometers, 3-way toggle switch and coloured wire 2x chrome dome knobs Black triangular truss rod cover Chrome square jack plate with output jack Ivory oval rear cavity cover 2x chrome strap buttons with black felt washers and screws Coiled string set with ball ends 2x nuts and 2x washers Assorted chrome screws Allen wrench Black instrument cable What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
Related
Related
Related
Related