These sockets are necessary when rebuilding your split rims. They allow you to undo your existing bolts and torque up your new bolts. This set comes complete with a socket to lock into the front head of the bolt and one to lock into the rear of the nut. 10 Point bolts and nuts are most commonly used by OZ Racing. Perfect to split your OZ wheels. Our hardware is 12 Point. We do not sell 10 Point Split Rim Bolts. SPECS: This socket set comprises of both a 8mm and a 10mm Impact socket. This socket set allows 10 Point Bolts and 10 Point nuts to be loosened and tightened. They require a 1/2" drive. Manufactured from Chrome Molybdenum. TORQUE: The torque setting for bolts is dependent on the set of wheels you have. The average torque figure for a set of three piece wheels is 22ft/lbs and 15ft/lbs for two piece wheels. We recommend that all split rim wheel rebuilds are done by a professional split rim wheel refurber. Always tighten from the nut end, however we understand that on some wheels this may not be possible. *Please double check the sizes you need before ordering as we do not accept returns on any bolt or nut orders.
