Targeted Red Light + Heat — Ankle Optix Ankle Pad The Optix Ankle Pad combines three therapies in a single wearable — red light (633nm), near-infrared light (830nm), and adjustable heat (105°F, 109°F, 117°F) — shaped to conform around the ankle joint. The dual-wavelength pair targets tissue at two different depths: 633nm for skin and surface tissue, 830nm for deeper muscle and connective tissue around the joint. Heat layers in for circulation and tightness relief. Built for sore ankles from training, sprain recovery, or general inflammation. Irradiance is 20 mW/cm² — calibrated for the smaller surface area of the ankle joint. Three adjustable intensity levels let you customize each session. A built-in 15-minute timer handles session length automatically. The compression-style strap keeps the pad snug around the ankle through sitting, lying, or moving. 10,000 mAh rechargeable battery means no cord and no outlet — use it at home, at the gym, or wherever the ankle needs work. Wavelengths 633 + 830 nm Red + Near-Infrared Irradiance 20 mW/cm² Joint-targeted dose Heat Levels 3 Settings 105 / 109 / 117 °F Battery 10,000 mAh Rechargeable, cordless 15-Minute Auto Shut-Off Ankle-Conforming Compression Strap 3 Intensity Levels Cordless · Use Anywhere Triple Relief Technology Three therapies, calibrated for the ankle. Red light, near-infrared light, and adjustable heat running together through a single 15-minute session — with form factor and dose tuned specifically for the ankle joint. 🔴 Dual-Wavelength Red + NIR Light Two therapeutic wavelengths — 633nm ± 5nm in the red range and 830nm ± 5nm in the near-infrared range. The 633nm wavelength targets surface tissue; 830nm penetrates deeper into the muscle and connective tissue around the joint. Irradiance hits 20 mW/cm², calibrated for the smaller surface area of the ankle. 633 + 830 nm · 20 mW/cm² 🔥 Three-Setting Adjustable Heat Heat layers on top of the light therapy with three adjustable intensity levels — 105°F, 109°F, and 117°F. Heat drives circulation around the joint and softens tight surrounding musculature. The combination of heat plus dual-wavelength light is the "triple relief" architecture shared across the Optix line. 105°F · 109°F · 117°F Built for Ankles That Work Hard Targeted joint relief, on demand. 🔴 Dual Red + NIR Light 633 + 830 nm 🦶 Ankle-Conforming Fit Compression Strap 🔥 3-Setting Heat 105 / 109 / 117 °F 🔋 10,000 mAh Battery Cordless, Rechargeable ⏱️ 15-Minute Auto Shut-Off Set and Forget 🎯 Joint-Targeted Dose 20 mW/cm² 🔌 No Outlet Required Use Anywhere 🏠 At-Home Sessions 15 Min Daily Inside the Pad What the Ankle Pad does differently. Ankle-Specific Fit Designed to conform to the ankle. The Ankle Pad is shaped specifically to wrap around the ankle joint — Achilles, malleoli, and over the dorsum — rather than sitting flat against the foot or shin. The compression-style strap keeps the pad snug through movement or while sitting/lying. The form factor is what distinguishes it from the Universal Pad: same wavelengths, same heat settings, same battery, but the shape is purpose-built for the ankle contour. Conforms to the ankle joint — Achilles, malleoli, dorsum Compression-style strap — secure fit through movement Use sitting, lying, or moving — strap holds the pad in place Ankle-Conforming Compression Strap Triple Relief Light + heat in one 15-minute session. Two therapeutic wavelengths run simultaneously with adjustable heat for the full 15-minute session. The 633nm wavelength targets surface tissue and skin; 830nm penetrates deeper into the muscle and connective tissue around the joint. Heat selection (105°F, 109°F, or 117°F) lets you match intensity to the session — gentle warmth for daily maintenance, stronger heat for tight, sore ankles after training or for sprain rehab. Dual wavelengths: 633nm ± 5nm (red) and 830nm ± 5nm (near-infrared) Irradiance: 20 mW/cm² — calibrated for joint-area dosing Three heat settings: 105°F, 109°F, 117°F 15-minute auto shut-off — no manual session tracking Red + NIR 3 Heat Levels Auto Shut-Off The Optix Lineup Targeted pads for every region. The Optix series uses the same triple-relief architecture across multiple form factors. Pick the pad that matches where you need the relief most. Optix Back Pad Highest-output pad in the Optix line. Built for the lumbar and thoracic region with the largest battery and the strongest irradiance. 633 + 830 nm wavelengths 30 mW/cm² irradiance 20,000 mAh battery 15-min sessions · 3 heat levels Optix Knee Pad Conforms to the knee joint with form-fitted construction. Built for sore knees from training, joint inflammation, or daily aches. 633 + 830 nm wavelengths 20 mW/cm² irradiance 10,000 mAh battery 15-min sessions · 3 heat levels You're Here Optix Ankle Pad Conforms to the ankle joint with form-fitted construction. Built for sore ankles, sprain rehab, or general inflammation. 633 + 830 nm wavelengths 20 mW/cm² irradiance 10,000 mAh battery 15-min sessions · 3 heat levels Optix Universal Pad Conforms to any body part — quads, shoulders, hamstrings, calves. Matches the Back Pad's irradiance in a flexible form factor. 633 + 830 nm wavelengths 30 mW/cm² irradiance 10,000 mAh Li-Ion battery 15-min sessions · 3 heat levels Full Spec Sheet Specifications Light System Wavelengths633 nm ± 5 nm and 830 nm ± 5 nm Irradiance20 mW/cm² Heat Heat settings105°F, 109°F, 117°F Intensity levels3 adjustable Session & Power Timer15 minutes (auto shut-off) Battery10,000 mAh rechargeable OperationCordless Fit StrapCompression-style strap Target areaAnkle joint Questions Frequently Asked Questions How does the Optix Ankle Pad work?+ The Ankle Pad runs three therapies simultaneously through a 15-minute session. Red light (633nm) targets surface tissue, near-infrared light (830nm) penetrates deeper into the muscle and connective tissue around the joint, and adjustable heat (105°F, 109°F, or 117°F) drives circulation and softens tight surrounding musculature. The compression strap holds the pad snugly around the ankle, and the device shuts off automatically after 15 minutes. What's the difference between the Ankle Pad and the Universal Pad?+ The Ankle Pad is shaped specifically to wrap the ankle joint — Achilles, malleoli, and dorsum. The Universal Pad is a flatter form factor designed to conform to any body part. Both share the same 633 + 830 nm wavelengths, the same three heat settings, and the same 10,000 mAh battery. The Universal Pad has higher irradiance (30 mW/cm² vs 20 mW/cm²). Pick the Ankle Pad for joint-specific fit; the Universal for flexibility across body parts. How long is a session?+ 15 minutes. The pad has a built-in 15-minute timer that automatically shuts the device off — no need to track time manually. Do I need a wall outlet?+ No. The Ankle Pad runs on a 10,000 mAh rechargeable battery — cordless operation, use it anywhere. Charge with the included charging cord. Can I adjust the heat?+ Yes. Three adjustable heat settings: 105°F, 109°F, and 117°F. Match the intensity to what your ankle actually needs — gentle warmth for daily maintenance, stronger heat for sore ankles after training or for sprain rehab. Will the strap stay on while I'm moving?+ Yes. The compression-style strap is designed to hold the pad snugly around the ankle through movement — sitting, lying, or walking around. The fit is purpose-built for the ankle contour rather than a flat panel. document.querySelectorAll('.product-pdp .faq-item button').forEach(btn => { btn.addEventListener('click', () => { const item = btn.closest('.faq-item'); const answer = item.querySelector('.faq-answer'); item.classList.toggle('active'); answer.classList.toggle('open'); }); });
