500 Series Stereo 4-band Equaliser Module. Fusion-derived EQ in a 500 Series Module Derived from the Violet EQ section of SSL's much-admired Fusion processor, the UltraViolet gives you two bands of minimum-phase shelving equalisation. This 500 Series module takes things a bit further than Fusion, however, with two additional fully parametric mid bands and a Focus control for surgical tone sculpting. You also get a 5-frequency selectable high pass filter, along with a ±12dB output trim and a bypass switch. Simply stated, the Solid State Logic UltraViolet is a stellar-sounding EQ with eminently musical curves. And here's a quick tip for an instant radio-ready sound: pair the UltraViolet with the 500 Series SSL Bus Compressor module, and every mix will sound like a finished record. Four bands of flexible SSL-style sound shaping The UltraViolet puts four flexible bands of legendary SSL tone sculpting right at your fingertips. For starters, you get minimum-phase high shelving and low shelving bands, which were culled from SSL's acclaimed Fusion processor. You also get two fully parametric mid bands. The high band gives you a frequency selection of 8kHz, 12kHz, 16kHz, and 20kHz; the low band offers choices of 30Hz, 50Hz, 70Hz, and 90Hz. The high midband ranges from 400Hz to 6kHz, while the low midband ranges from 100Hz to 1.1kHz. You also get a switchable high pass filter with Off, 30Hz, 40Hz, and 50Hz settings. Pressing the Focus button narrows the corresponding band's Q setting and increases its gain range beyond the normal ±9dB for laser-precise, surgical sonic sculpting. Solid State Logic UltraViolet EQ Features: Packs 4 bands of SSL console-style sound shaping into a 500 Series module Fusion-derived high/low shelving bands and 2 fully parametric mid bands with ±9dB of gain High band gives you a frequency selection of 8kHz, 12kHz, 16kHz, and 20kHz Low band gives you a frequency selection of 30Hz, 50Hz, 70Hz, and 90Hz High midband ranges from 400Hz–6kHz with a continuously variable Q Low midband ranges from 100Hz–1.1kHz with a continuously variable Q High pass filter includes Off, 30Hz, 40Hz, and 50Hz settings Focus narrows the corresponding band's Q setting and increases its gain range for surgical sonic sculpting ±12dB output trim makes achieving proper gain staging a breeze Bypass switch makes A/B comparisons a piece of cake
