Sonax Polymer Net Shield Aerosol-based polymer sealant makes paint protection quick and easy! Sonax Polymer Net Shield is a cutting-edge aerosol-based spray sealant that takes minutes to apply and lasts up to six months! Sonax Polymer Net Shield is formulated using advanced German technology to provide a level of paint protection that used to be exclusive to liquid paint sealants. Sonax Polymer Net Shield takes just minutes to apply, and your paint will explode with color and depth like you've never seen before! Sonax Polymer Net Shield is formulated using an organic and inorganic network of hybrid polymers. This new generation of polymers produces crisp, clear reflections while protecting paintwork from UV rays, acid rain, bird droppings, airborne contaminants and even road salt. The surface tension created by Sonax Polymer Net Shield causes water to bead up and roll off; your vehicle will stay cleaner in between washes because nothing will stick! Sonax Polymer Net Shield is packaged in an aerosol can for two reasons: First, as soon as the contents are exposed to oxygen, the hybrid polymers immediately begin to cross-link and harden. Second, ease of application! Thanks to its aerosol packaging, Sonax Polymer Net Shield takes just minutes to apply. Directions: Shake Well: Shake the aerosol can vigorously for at least 30 seconds to fully mix the contents. Test Spray: Spray a small amount onto a non-critical area to confirm the product is flowing correctly. Apply and Spread: Work one panel at a time (e.g., half a hood or a single door). Spray a thin, even layer of Sonax Polymer Net Shield directly onto the paint surface. Immediately use a clean, dedicated foam or microfiber applicator pad to spread the product evenly across the panel in overlapping motions. Buff Off: Without allowing the product to dry or "haze," immediately buff the treated area to a crystal-clear, high-gloss finish. Repeat: Repeat steps 3 and 4 until the entire vehicle is sealed. Use a fresh side of your microfiber towel as needed. Cure Time: Allow the polymer net to fully cure for approximately one hour before exposing the vehicle to moisture. Note: The aerosol formula is designed for convenience and a perfect spread. Do not use excessive product—a thin coat is all that is required for maximum performance. Enjoy your newly protected and intensely glossy finish!
