Soudabond Easy is a fast curing, ready to use, one component, PU adhesive. Integrated gun system Reusable Easy application Time & money saving Excellent adhesion to almost all substrates Fast cure High initial grip Even adheres to moist surfaces 20 oz. aerosol can Genius Gun • Polyurethane Adhesive • Moisture Cure, One Component • One Can Replaces up to 10 (24oz gun)/ 7.5 (20oz Genius) Quart Tubes of Solvent Based Adhesive • One Can Covers up to 140ft 2 (24oz Gun)/ 105ft 2 (20oz Genius) of Insulation Boards Base Consistency Curing system Curing speed (*) Skin formation (*) Can be trimmed (*) Full strength (*) Post expansion Thermal conductivity (DIN 52612) Tensile strength Shear strength Temperature resistance UL 723 (ASTM E 84) Fire test Single component polyurethane Stable adhesive foam (does not sag) Moisture cure at room temperature About 30 minutes -1.2-inch adhesive bead About 8 minutes - 1.2-inch adhesive bead About 50 minutes -1.2-inch adhesive bead About 12 hours - 1.2-inch adhesive bead Minimal About 0.035 W/(m·K) 27.6 lb./in 2 20.6 lb. /in 2 -40°F to +194°F when cured/ +248 °F (up to max. 1 hour) Flame Spread 15, Smoke Developed 35 (*) Measured at 68 °F / 65 % R.H. These values may vary depending on ambient factors such as temperature, humidity and type of substrate. Limitations: • Excellent adhesion on most substrates, except for PTFE, PE and PP. • Always store can with the valve pointed upwards. • Cured PU foam must be protected from UV radiation. • Lower temperature and humidity will extend curing time. • Excellent Adhesion to Most Building Materials • Even Sticks to Moist Surfaces • High Initial Grip (Green Strength) • Great Thermal & Acoustical Insulation • Cost-saving (Time & Labor) • Solvent Free • CFC-free Propellants, Harmless to Ozone Layer
