For sale: Professional Sound Devices USBPre two-channel computer audio interface, designed for high-quality audio recording and playback with a computer. The USBPre was aimed at professional location recording, broadcast and studio applications, combining a compact portable format with Sound Devices’ professional audio engineering. This example is in good used cosmetic condition but has not been tested, so it is offered as an untested unit. ''Please ask us for a shipping quote for the best shipping rates. Shown costs might be incorrect, or we can offer better services'' Cosmetic condition: Good overall used condition Light signs of normal previous use may be present No major cosmetic damage reported Controls and connections appear physically intact Please see the photos for the exact cosmetic condition Functional Status: ⚠️ Untested The interface has not been functionally tested. Because its operating condition has not been verified, no guarantee can be given regarding inputs, outputs, USB communication or other functions. Specs: Specification Details Type Two-channel USB audio interface with microphone preamps Computer connection USB 1.1, USB Type-B connector Recording resolution 8, 16 or 24-bit Recording sample rates 32, 44.1 and 48 kHz Playback resolution 8 or 16-bit; 24-bit sources played back at 16-bit Playback sample rates 5–55 kHz A/D converter 24-bit D/A converter 16-bit A/D dynamic range ≥104 dB in 24-bit mode; ≥96 dB in 16-bit mode, A-weighted D/A dynamic range ≥90 dB, A-weighted Frequency response — recording 10 Hz–20 kHz, ±0.5 dB Frequency response — line output 10 Hz–20 kHz, ±1.0 dB THD+N — recording ≤0.05% at minimum gain, input driven to −6 dBFS THD+N — line output ≤0.009% at 0 dBFS into 100 kΩ Microphone equivalent input noise −124 dBu (150 Ω source, gain ≥50%, pad off) Microphone inputs 2 × balanced XLR Line/instrument inputs 2 × switchable balanced line / unbalanced high-impedance DI Tape inputs Stereo RCA, unbalanced Microphone input impedance 2 kΩ Line input impedance 65 kΩ Instrument input impedance 10 MΩ Tape input impedance 110 kΩ Microphone input pad 15 dB, individually switchable per channel Phantom power 48 V, up to 10 mA per microphone input Analog line output Stereo RCA, computer playback signal Maximum line output +8 dBu / 2.0 V RMS into 100 kΩ, at 1% THD Headphone outputs 6.35 mm and 3.5 mm stereo TRS Maximum headphone output +11 dBu / 2.75 V RMS into 600 Ω, at 1% THD Output impedance Line: 3.3 kΩ; headphones: 20 Ω Digital connections Coaxial S/PDIF input and output* S/PDIF resolution Up to 24-bit input; up to 20-bit hardware output, depending on driver/OS Monitoring Zero-delay analog input monitoring with input/computer playback mix control Level meters Six-segment LED peak meters, 30 dB range Power supply USB bus powered, 5 V DC, maximum 500 mA Construction Extruded aluminium chassis with aluminium knobs Dimensions (LxWxH): 18 × 10 × 4,3 cmWeight: 2 Kg We ship worldwide.For international shipping, import fee's apply. These vary per country, and are for the buyer to pay.-Shipping in the EU up to 30 KG (max)-Shipping outside of the EU up to 20 KG (max) Shown costs might vary. Please ask us for a shipping quote for the best rates!-We kindly ask you to reach out for the best shiping rates. As rates vary per shipper, we can ask custom shipping quotes. Please note: ‘’Whenever an item exceeds the weight noted above. Please ask for a shipping quote before making a purchase. The shipping costs are estimated in our shop because we do not know the shipping address. Picking up the item is also possible. It can be picked up in Alkmaar Delivery by us is also possible in some cases. Please reach out to us for more information about deliveries State of listing: If a listing is listed ''for parts or not working'' returns are not accepted. When we offer our products with the notice ''Serviced'' or ''Fully serviced'' that means the device is either ''serviced'' with a new belt, and cleaned the pots, Or ''Fully serviced'' recapped, Quiescent current adjusted etc as expected from a full service
