The SparkFun MicroMod Pi RP2040 Processor Board is a low-cost, high-performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. With the MicroMod M.2 connector, connecting your MicroMod Pi RP2040 Processor Board is a breeze. Simply match up the key on your processor's beveled edge connector to the key on the M.2 connector and secure it with a screw (included with all Carrier Boards). The RP2040 utilizes dual ARM Cortex-M0+ processors (up to 133MHz): 264kB of embedded SRAM in six banks 6 dedicated IO for SPI Flash (supporting XIP) 30 multifunction GPIO: Dedicated hardware for commonly used peripherals Programmable IO for extended peripheral support Four 12-bit ADC channels with internal temperature sensor (up to 0.5 MSa/s) USB 1.1 Host/Device functionality The RP2040 is supported with both C/C++ and MicroPython cross-platform development environments, including easy access to runtime debugging. It has UF2 boot and floating-point routines baked into the chip. The built-in USB can act as both device and host. It has two symmetric cores and high internal bandwidth, making it useful for signal processing and video. While the chip has a large amount of internal RAM, the board includes an additional external flash chip. &feature=emb_title Features RP2040 General Features Dual Cortex M0+ processors, up to 133 MHz 264 kB of embedded SRAM in 6 banks 6 dedicated IO for QSPI flash, supporting execute in place (XIP) 30 programmable IO for extended peripheral support SWD interface Timer with 4 alarms Real time counter (RTC) USB 1.1 Host/Device functionality Supported programming languages MicroPython C/C++ Specific Peripherals made available on MicroMod RP2040 1x USB dedicated for programming and debug (Host capable) 2x UARTs 2x I 2 C 2x SPI 29x GPIO 2x Digital Pins 3x Analog Pins 16x PWM 128Mbit/16MB (external) flash memory Status LED VIN Level ADC Documents MicroMod Pi RP2040 Processor Documentation Schematic Eagle Files Board Dimensions Hookup Guide Graphical Datasheet RP2040 Datasheet (31.2 MB) Raspberry Pi Pico Datasheet (16.5MB) - An RP2040-based microcontroller board Getting Started with Raspberry Pi Pico (32.9MB) - C/C++ development with Raspberry Pi Pico and other RP2040-based microcontroller boards Raspberry Pi Pico C/C++ SDK (2.14MB) - Libraries and tools for C/C++ development on RP2040 microcontrollers Raspberry Pi Pico Python SDK (2.66MB) - A MicroPython environment for RP2040 microcontrollers RP2040 Info Page GitHub Hardware Repo MicroMod Documentation: SparkFun MicroMod Interface v1.0 - Pinout SparkFun MicroMod Interface v1.0 - Pin Descriptions Getting Started with MicroMod Designing with MicroMod MicroMod Info Page MicroMod Forums SparkFun Eagle Libraries contains example footprints for the M.2 connector and SMD standoff M.2 MicroMod Connector Datasheet MicroMod Reflowable Standoff Datasheet
