SparkFun MicroMod Single Pair Ethernet Kit Offers an integrated media access control interface Features a single-port Two-Wire Ethernet transceiver Includes a 0.5-meter single-pair Ethernet Cable Ultra-low power consumption Uses a single twisted pair for data and power The SparkFun MicroMod Single Pair Ethernet Kit demonstrates the 10BASE-T1L Two-Wire Ethernet protocol within the SparkFun MicroMod ecosystem by using two SparkFun MicroMod Single Pair Ethernet Function Boards and including all the accessories to run a proof of concept example over 0.5 meters of cable, which can be helpful before installing application nodes 1700 meters apart to monitor remote equipment. The ADIN1110 is an ultra-low power, single-port Two-Wire Ethernet transceiver. It features an integrated media access control (MAC) interface to allow for direct connections with a host controller via a serial peripheral interface (SPI) at 10 Mbp/s full duplexes. To top it off, the specified cable reach for edge nodes is up to 1700 meters. 10BASE-T1L Ethernet uses a single twisted pair for data and power (Note: this Function Board is not designed to provide power over the cable) intended for long-distance connections with reduced cable weight and increased connector integrity for edge node devices for applications such as industrial installations and field instruments. 10BASE-T1L Ethernet is compatible with the 802.3cg IEEE standard, supports high bandwidth up to 10Mb/s, and can send and receive data on Ethernet connections over 1 kilometer long. This kit can be used with an example based on two nodes. A MicroMod Single Main Board with a MicroMod Artemis processor and a MicroMod Single Main Board with a MicroMod ESP32 Processor processor. These two Main boards should be connected with the included 0.5 meter Industrial Ethernet Cable. Note: This kit includes the required hardware to provide proof of concept communication over 10BASE-T1L Ethernet. A Qwiic sensor should also need to be integrated into your system depending on your monitoring application. These parts will need to be purchased separately.
