The Mini-Split Bib Kit 360 is SpeedClean's most complete way to clean ductless mini-split coils, blower wheels and more. The kit lets you safely and quickly clean virtually any wall-mounted mini-split system the correct way, using pressurised water on coils, blower wheels and more. The patented design keeps water away from walls, ceilings and other surroundings and directs it into the included bucket for disposal, so it is clean and safe all around. Protects the walls, ceilings and surroundings from water and overspray Quick set-up and easy to move from job to job A reusable bib system gives a lower cost per use Why a Bib Kit? SpeedClean describes mini-split systems as the fastest-growing segment of HVAC installations, and cleaning them can be profitable work. Until bib kits arrived there was no easy way to properly clean an installed mini-split — it was a labour-intensive and tedious process. The reusable, patented Mini-Split Bib Kit from SpeedClean changes that. It attaches quickly to mini-split systems up to 44 in (112 cm) wide using special brackets, and the custom plastic bib section creates a barrier against the wall and other surroundings so you can clean the coils, fan blades and more with pressurised cleaning systems, like pump sprayers or the CoilJet Portable Coil Cleaning System. What "360" Adds The standard Mini-Split Bib Kit is built to protect the wall. SpeedClean's description of the 360 adds ceilings — useful where the indoor unit is mounted close to the ceiling and overspray would otherwise mark it. Both kits fit units up to 44 in wide. How to Set It Up The system is simple to use. Slide the brackets in behind the corners of the mini-split air handler. Attach the bib and protective wall plates and tighten. Then place the bottom of the bib funnel into the included 5 gallon (about 20 litre) bucket. All coil cleaner, water and debris are funnelled into the bucket. No mess, and no fuss. When you are done, dry the bib and store it in the bucket. Features Fits mini-split systems up to 111 cm wide (SpeedClean: 44 in, about 112 cm) Reusable — lower cost of ownership Allows quick and easy cleaning of coils, fan blades, blower wheels and more 2.4 m hose funnels all coil cleaner and water safely into the included 20 litre bucket for easy transport and disposal Strong 6 mil plastic bib with sonically welded seams Keeps walls and surroundings safe from water and cleaner spray Correction to This Listing The earlier text described the bib as 4 mil in one paragraph and 6 mil in the feature list. SpeedClean lists the 360 bib as 6 mil — the 4 mil figure has been removed. What Is in the Kit 360 bib, 6 mil plastic with sonic-welded seams Adjustable mounting brackets Protective wall plates 8 ft (about 2.4 m) hose 5 gallon bucket Specifications Brand SpeedClean SpeedClean part number MSB-360-KIT Fits Ductless wall units up to 44 in (about 112 cm) wide Bib 6 mil (about 0.15 mm) plastic, sonic-welded seams Hose 8 ft (about 2.4 m) Bucket Included, 5 gallon (about 19–20 litres) Replacement bib SpeedClean MSB-14 — not listed by CCW, ask us CCW SKU MSB-360-KIT Choosing the Right SpeedClean Bib Kit Fits Bucket Replacement bib Mini-Split Bib Kit (MSB-KIT) Wall-mounted units up to 44 in (112 cm) wide Included MSB-01 Mini-Split Bib Kit without bucket Wall-mounted units up to 44 in (112 cm) wide Not included MSB-01 Mini-Split Bib Kit XL without bucket Larger wall-mounted units, 45 to 60 in (about 114 to 152 cm) wide Not included BXL-001 (not listed by CCW — ask us) Mini-Split Bib Kit 360 (this product) Wall-mounted units up to 44 in (112 cm) wide; also protects the ceiling Included MSB-14 (not listed by CCW — ask us) Mini-Split Cassette Bib Kit Ceiling cassettes up to 48 in (122 cm) wide Ask us — SpeedClean supply their kit with one Cassette replacement bib Widths are SpeedClean's figures. Measure the indoor unit across its widest point before ordering. Before You Wash Isolate the air conditioner at the switchboard or isolator before fitting the bib — SpeedClean's first step is to turn off the main power. Cover the unit's display, control board and any wall-mounted controller with the low tack tape. Do not use masking or packing tape on painted walls. Check the bib for holes and the drain spout for splits before you start. A leaking bib puts water down a customer's wall. Keep the bucket below the bib outlet so the drain hose runs downhill all the way. Coil cleaner and wash water go to the bucket. Dispose of it in line with the chemical's SDS and local trade waste rules, not into a stormwater drain. Frequently Asked Questions How many units can I clean with the included bib (bag)? There is no set number of units you can clean before the bag needs replacing. In general 10 to 12 units is the going number, but proper storage and handling can change that dramatically. Can I fit the standard MSB-01 replacement bib? SpeedClean lists a separate replacement bib for the 360 (MSB-14). The MSB-01 is listed for the standard kit — check with us before substituting. 360 or the standard kit? If the indoor units you service are mounted close to the ceiling, the 360's ceiling protection is the reason to choose it. Otherwise the standard kit does the same wall-protection job. My unit is wider than 112 cm. Use the Mini-Split Bib Kit XL, listed by SpeedClean for units 45 to 60 in wide. Spare Parts and Accessories Replacement bib MSB-01 (standard wall-mount kit) Replacement low tack tape Replacement cord and toggle cord lock SpeedClean CoilJet CJ-125 — SpeedClean's recommended pressurised cleaner for the bibs Flexible straight wand and flexible 90 degree wand for blower wheels and awkward coils SpeedClean Tell us the make, model and width of the units you service and we will confirm the right kit or part before you order.
