SpeedyBee F7 Mini 35A 3-6S 8-bit Flight Controller StackSpecifications: Product Name SpeedyBee F7 MCU STM32F722 IMU(Gyro) MPU6000 USB Port Type Type-C Barometer N/A OSD Chip AT7456E chip BLE Bluetooth Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART 6) Flash FC Firmware Wirelessly Not supported. Please update firmware for this FC on the PC Download/Analyze Blackbox Not supported. Please download and analyze Blackbox data on the PC DJI Air Unit Soldering Pads Supported Flash(for BlackBox) 8MB Current Sensor Supported, Scale=250 Offset=-500 BetaFlight Camera Control Pad Yes(CC pad) Power Input 3S - 6S Lipo 5V Output 6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). The total current load is 2.5A. 9V Output 2 groups of 9V output, the total current load is 2A. 3.3V Output Supported. Up to 500mA current load. ESC Signal Pads M1 - M4 UART Full UART * 3(UART1, UART2, UART3) ESC Telemetry UART R4(UART4) I2C Not supported LED Pad Used for WS2812 LED Buzzer BZ+ and BZ- pad used for 5V Buzzer BOOT Button Used to enter DFU mode RSSI Input Not supported SmartPort Use any TX pad of UART for the SmartPort feature. Supported Flight Controller Firmware BetaFlight(Default), EMUFlight, INAV Firmware Target Name SPEEDYBEEF7MINI Mounting 20 x 20mm, 3.5mm hole diameter Dimension 30 x 30 x 7.5mm Weight 5.7g Product Name SpeedyBee 35A BLHeli_S Mini 4-in-1 ESC Specs Firmware BLHeli_S JH40 Continuous Current 35A * 4 Burst Current 45A(5S) ESC Protocol DSHOT300/600 Power Input 3-6S LiPo Power Output VBAT Current Sensor Support (Scale=250 Offset=-500) Mounting 20 x 20mm, 3.6mm hole diameter Dimension 35 * 35 * 5.5mm Weight 7g
