Spendor Classic Speaker Stand

Vinyl Sound USA Verified independent store

→

Spendor Classic Speaker Stand at Vinyl Sound Buffalo, NY USA The Spendor Classic Speaker Stand is a precision-engineered, rigid open-frame loudspeaker stand from Spendor Audio Syst ems (Hailsham, England, UK), available at Vinyl Sound in Buffalo, NY, USA. Designed specifically for the Spendor Classic standmount loudspeaker range — including the Classic 4/5, Classic 3/1, Classic 2/3, Classic 1/2, Classic 100, and Classic 100Ti — each stand is 425mm tall (excluding spikes) and constructed from precision machined solid alloy with stainless steel top supports, supplied fully assembled. Each model variant is dimensioned to correctly position its corresponding loudspeaker at the optimal listening height for a seated listener, with the tweeter aligned to ear level. Stands are priced and packaged as pairs. Innovative Engineering: Ultra-Rigid, Non-Resonant, Low-Mass Alloy Construction The Spendor Classic Stand represents a thorough engineering approach to a component that is often treated as an afterthought. The loudspeaker cabinet is supported on four slim solid alloy pillars, rigidly tied together via two independent machined solid alloy hubs. Every component is precision machined to ensure direct metal-to-metal contact at every junction, with no flex or play at any of the mechanical interfaces between individual components. The result is a completely stable, ultra-rigid, lightweight, non-resonant structure that eliminates the spurious noise and vibration that inferior stands introduce into the loudspeaker's acoustic output. Unlike hollow steel tube stands that ring at specific frequencies, or stands filled with sand that add mass without rigidity, the Classic Stand's four-pillar solid alloy design achieves structural stiffness through geometry rather than mass — keeping the stand's own contribution to the acoustic signature as close to zero as possible. The satin-black finish with fine machined stainless steel top supports complements the Classic series' wood-veneer aesthetic, while hi-grip non-slip rigid clear polymer discs at the top plate prevent cabinet movement under high drive levels. Four M8 top-adjustable stainless steel spike feet with lock nuts and 25–35mm adjustment range ensure levelling on any floor surface, and the stand ships fully assembled with a 5mm hex key and 8mm spanner included for spike adjustment. Model-Specific Design: Correct Height and Top Plate for Each Classic Loudspeaker The Spendor Classic Stand is produced in model-specific variants, each with a top plate dimensioned to match its corresponding loudspeaker and a 425mm height (excluding spikes) calibrated to position each model's tweeter at the correct ear-level height for a seated listener. This height consistency across the range — from the compact Classic 4/5 to the large Classic 1/2 and Classic 100 — is the result of Spendor's specific knowledge of each cabinet's acoustic geometry and the listening position requirements of its customer base. When selecting Classic Stands, the correct model variant must be chosen to match the loudspeaker being used: the Classic 2/3 stand, for example, has a narrower top plate (268mm wide) than the Classic 1/2 stand (303mm wide) to precisely match the footprint of each respective cabinet. Contact Vinyl Sound for guidance on selecting the correct stand variant for your specific Classic loudspeaker model. All Spendor Classic Stands are designed and manufactured in the UK. Key Features Rigid Open-Frame Non-Resonant Construction: Four slim solid alloy pillars tied by two independent machined alloy hubs create an ultra-rigid, low-mass structure with no flex at any mechanical junction — eliminating stand-induced vibration and resonance that would colour the loudspeaker's output. Precision Machined Solid Alloy with Stainless Steel Top Supports: Every component is machined to tight tolerances for direct metal-to-metal contact throughout the assembly, ensuring the stand contributes no spurious resonance to the acoustic signal. 425mm Height (Excluding Spikes): Consistent stand height across the Classic range positions each loudspeaker's tweeter at the correct seated listening height for optimal imaging and tonal balance. Model-Specific Top Plate Dimensions: Each stand variant has a top plate precisely dimensioned to match its corresponding Classic loudspeaker's footprint — providing secure, stable cabinet support without overhang or undersupport. Hi-Grip Non-Slip Polymer Cabinet Discs: Rigid clear polymer discs between the top plate and loudspeaker cabinet prevent movement under high drive levels while avoiding the acoustic contamination of compliant or felt-based coupling materials. M8 Top-Adjustable Stainless Steel Spike Feet: Four spikes with 25–35mm adjustment range and lock nuts level the stand precisely on any floor surface including carpet, hard floors, and uneven surfaces. Satin Black Finish: A satin-black powder coat with fine machined stainless steel top supports complements the Classic series' walnut and cherry wood-veneer aesthetic. Supplied Fully Assembled: No column filling or major assembly required — the stand arrives ready to use, with only spike height adjustment needed, plus a 5mm hex key and 8mm spanner included. UK Design and Manufacture: Designed and manufactured in the UK to the same exacting standard as the Classic loudspeakers themselves. Technical Specifications Type Rigid open-frame non-resonant lo-mass loudspeaker stand Material Precision machined solid alloy with stainless steel top supports Height (excluding spikes) 425mm Spike Adjustment Range 25–35mm (M8 top-adjustable stainless steel with lock nuts) Finish Satin black with fine machined stainless steel top supports Cabinet Supports Hi-grip non-slip rigid clear polymer discs Assembly Supplied fully assembled Accessories 5mm hex key and 8mm spanner (included) Weight (per stand) 10–11kg depending on model variant Compatible Models Classic 4/5, Classic 3/1, Classic 2/3, Classic 1/2, Classic 100, Classic 100Ti Origin Designed and manufactured in the UK Sold As Pair Frequently Asked Questions What is the Spendor Classic Speaker Stand? The Spendor Classic Speaker Stand is a precision-engineered, rigid open-frame non-resonant loudspeaker stand designed specifically for Spendor Classic standmount loudspeakers. Constructed from precision machined solid alloy with stainless steel top supports, it stands 425mm tall (excluding spikes), ships fully assembled, and is produced in model-specific variants with top plate dimensions matched to each Classic loudspeaker's footprint. Sold as a pair, it is designed and manufactured in the UK. Which Classic loudspeakers is this stand compatible with? Spendor produces Classic Stand variants for the Classic 4/5, Classic 3/1, Classic 2/3, Classic 1/2, Classic 100, and Classic 100Ti. Each variant has a different top plate width to match the footprint of its corresponding loudspeaker — for example, the Classic 2/3 stand is 268mm wide and the Classic 1/2 and Classic 100 stands are 303mm wide. It is important to specify the correct model variant when ordering. Contact the Vinyl Sound team to confirm which stand variant is appropriate for your loudspeaker. Why does a dedicated stand make a difference to sound quality? A loudspeaker stand's primary acoustic function is to couple the cabinet rigidly to the floor while preventing the stand itself from resonating sympathetically with the speaker's output. Generic stands built from hollow steel tubes have resonant frequencies that can be excited by music and add coloration to the sound; sand-filled stands add mass but may not achieve the rigidity needed for the tightest coupling. The Spendor Classic Stand's four-pillar solid alloy design achieves rigidity through geometry — metal-to-metal contact at every junction with no flex — producing an ultra-rigid, non-resonant structure. Spendor specifically notes that the Classic Stand design "results in no spurious noise or vibration to detract from the natural dynamics, transparency, soundstage and detail of your music." Does the stand arrive assembled? The Spendor Classic Stand arrives fully assembled — no pillar assembly, sand filling, or significant construction is required. The only adjustment needed after delivery is setting the four M8 stainless steel spike feet to the correct height for the floor surface, using the included 5mm hex key and 8mm spanner. The adjustment range of 25–35mm per spike accommodates carpet, hard floor, and mildly uneven surfaces. Can the Classic Stand be used on carpet or hard floors? The Spendor Classic Stand's M8 top-adjustable stainless steel spike feet with lock nuts and 25–35mm adjustment range work on both carpet and hard floor surfaces. On carpet, the spikes penetrate the pile to couple the stand directly to the subfloor for maximum rigidity. On hard floors, floor protectors (available separately from flooring accessory suppliers) can be used under the spike tips to prevent surface marking. The four-spike footprint provides stable support for stand weights of 10–11kg per stand plus the weight of the loudspeaker above. Where can I buy the Spendor Classic Speaker Stand in Buffalo, NY or the United States? The Spendor Classic Speaker Stand is available at Vinyl Sound in Buffalo, NY, USA, an authorized Spendor dealer serving customers across the United States. Vinyl Sound carries Classic Stand variants for the full range of Classic standmount loudspeakers. Contact the Vinyl Sound team to confirm the correct stand variant for your loudspeaker model, current availability, and pricing. Stands are sold as pairs. Show more