Spiral Cutterhead for Steelex 8" Jointer ST1011

Sheartak Tools Verified independent store

→

Revolutionize your Steelex 8" Jointer ST1011 with spiral cutterheads for the following benefits. * Better quality finish that helps reduce tear-out, including on difficult grain. A ll the inserts are angled along the helical in a staggered way and make shear-cut effects on even highly figured hardwood. * Noise is hugely reduced as the spiral cutter head keeps constant contact with the board with only a few knives. * All the cutters are made of solid tungsten carbide which is much harder and stayer sharp longer than high-speed steel blades. If one edge is chipped or dull, rotate it 90° for a new sharp edge. Each insert has four cutting edges and can be used four times. * Easy to set up. The indexable carbide inserts are precision ground to a very tight tolerance and are interchangeable. Loosen the screws, rotate 90°, and tighten the inserts in minutes. The inserts can be precisely positioned by the taper hole style locking. * Smaller carbide inserts remove shorter and thinner materials, which make dust extraction much easier. * For the long term, spiral cutter heads are cheaper to use and can pay for themselves in a very short time. Spiral Cutterhead Kit includes:* High tensile strength alloy steel cutter block.* 40 carbide inserts installed.* A pair of premium bearings.* 5 extra carbide inserts & 5 extra screws free as spare parts.* 1 Wrench Show more