Spendor A1W Surround Loudspeaker

Vinyl Sound USA Verified independent store

→

Spendor AW1 On-Wall Surround Loudspeaker at Vinyl Sound Buffalo, NY USA The Spendor AW1 is a compact 2-way sealed on-wall loudspeaker from Spendor Audio Systems (Rotherham, England , UK), available at Vinyl Sound in Buffalo, NY, USA. Built on the same platform as the Spendor A1 standmount, the AW1 adds a tilt/swivel wall-mounting bracket to the A1's sealed enclosure — pairing a 150mm EP77 polymer cone mid-bass driver with a 22mm polyamide dome tweeter crossing at 4.2kHz, spanning 55Hz to 25kHz at a sensitivity of 84dB. Compatible with amplifiers and AV receivers from 25 to 100 watts into a stable 8-ohm load, the AW1 serves equally as a surround channel speaker, a height channel for Dolby Atmos, or a front left/centre/right speaker in space-constrained home theatre and multi-room audio systems. Designed and manufactured in the UK. A1 Acoustic Performance, Purpose-Built for Wall Installation The Spendor AW1 is the wall-mount variant of the A1 standmount — sharing its sealed enclosure, 15cm EP77 polymer mid-bass driver, 22mm tweeter, 4.2kHz crossover, and acoustic tuning entirely, while adding a dedicated tilt/swivel bracket for permanent wall installation. The sealed-box design (shared with the A1 and Classic 4/5) produces controlled, accurate bass rolloff without port resonance or turbulence, making the AW1 exceptionally tolerant of close-wall mounting — the very placement condition that causes ported speakers to produce bass congestion. The cabinet measures 305mm tall with a depth of just 186mm to the wall surface (the mounting bracket adds a further 75mm clearance), allowing the AW1 to fit cleanly on walls of varying sizes and in room corners where conventional standmounts cannot be positioned. The 15cm EP77 polymer cone, Spendor's proprietary engineering polymer formulation, produces a natural, low-coloration sound that is consistent with the A-Line range's character — energetic, open, and detailed, with a sensitivity-to-impedance balance that makes the AW1 easy to drive from the modest channel outputs of AV receivers. Spendor's own A-Line product page notes that the AW1 "brings out the best from your AV amplifier" even at typical home cinema drive levels. Tilt/Swivel Bracket, EP77 Mid-Bass Driver, and Multi-Channel System Compatibility The AW1's supplied tilt/swivel bracket provides +/- 18° of vertical tilt and 180° of horizontal swivel, allowing the speaker to be precisely aimed at any seating position from any wall-mount angle. This flexibility is particularly valuable for side surround, rear surround, and Dolby Atmos overhead positions in complex home theatre layouts where fixed-angle brackets would produce off-axis listening conditions. The 15cm EP77 polymer cone mid-bass driver is identical to that used in the Spendor A1, delivering the proprietary polymer cone's characteristic natural sound with excellent detail resolution at both low and high listening volumes. The 22mm polyamide dome tweeter uses a fluid-cooled design for thermal stability and long-term dynamic handling, crossing in at 4.2kHz to match the A1's crossover geometry. Connection is via a single pair of recessed precision binding posts compatible with standard speaker cable and banana plugs. The AW1 is specifically recommended by Spendor for pairing with A1, A2, Classic 4/5, and Classic 3/1 stereo speakers for tonal consistency across all channels in a complete home theatre system. Key Features Tilt/Swivel Wall-Mounting Bracket: The supplied bracket provides +/-18° vertical tilt and 180° horizontal swivel — included in the box — allowing the AW1 to be precisely aimed at the listening position from any wall location, including side walls, rear walls, and ceiling-adjacent positions for Dolby Atmos height channels. 150mm EP77 Polymer Cone Mid-Bass Driver: Spendor's proprietary EP77 engineering polymer cone in a cast magnesium alloy chassis delivers natural, low-coloration sound with excellent detail resolution at all listening levels, identical to the driver used in the Spendor A1 standmount. 22mm Fluid-Cooled Polyamide Dome Tweeter: A fluid-cooled dome tweeter provides thermal stability for sustained high-SPL home theatre operation, crossing in at 4.2kHz for a smooth, extended high-frequency response to 25kHz. Sealed-Box Enclosure: A non-ported cabinet produces controlled, accurate bass rolloff without port resonance — critical for close-wall installation where reflex-loaded designs would develop bass congestion and coloration. 186mm Cabinet Depth: At just 186mm deep (plus 75mm for the mounting bracket), the AW1 mounts close to the wall surface with minimal protrusion, integrating unobtrusively into the room without the visual dominance of larger on-wall designs. Multi-Format Home Theatre Compatibility: Suitable for surround (5.1, 6.1, 7.1), height channel (Dolby Atmos), and full front left/centre/right channel duties — providing tonal consistency across all speaker positions when matched with A1, A2, Classic 4/5, or Classic 3/1 stereo models. AV Receiver Friendly: An 8-ohm nominal impedance (minimum 6.2 ohms) with 84dB sensitivity is calibrated for easy drive from typical multi-channel AV receivers, which commonly operate at 50–100W per channel. Broadcast Reference Calibration: Each AW1 is calibrated and matched to broadcast reference standard at Spendor's UK facility — the same standard applied to all A-Line and Classic loudspeakers. UK Manufacture: Designed and manufactured in the UK, with all drivers, crossovers, and cabinets produced in-house by Spendor. Technical Specifications Type 2-way sealed on-wall loudspeaker Mid-Bass Driver 150mm EP77 polymer cone, cast magnesium alloy chassis HF Driver 22mm fluid-cooled polyamide dome Frequency Response 55Hz to 25kHz (typical in-room) Nominal Impedance 8 Ohms (min 6.2 Ohms) Amplifier Power 25 to 100 watts Sensitivity 84dB (1W/1m) Crossover Frequency 4.2kHz Enclosure Type Sealed (non-ported) Input Connection Single pair recessed precision binding posts Cabinet Dimensions (H x W x D) 305mm x 165mm x 186mm (excluding bracket) Total Depth (inc. bracket) 261mm (186mm + 75mm bracket) Weight 5kg per speaker Bracket Tilt/swivel: +/-18° tilt, 180° swivel (included) Finishes Black Oak, Walnut, Oak, Satin White Origin Designed and manufactured in the UK Sold As Pair Frequently Asked Questions What is the Spendor AW1? The Spendor AW1 is a compact 2-way sealed on-wall loudspeaker sharing the acoustic design of the Spendor A1 standmount, with a tilt/swivel wall-mounting bracket (included) providing +/-18° tilt and 180° swivel for precise listener aiming. It features a 150mm EP77 polymer cone mid-bass driver and a 22mm fluid-cooled polyamide dome tweeter crossing at 4.2kHz, spanning 55Hz to 25kHz at 84dB sensitivity. Designed and manufactured in the UK, it is intended for use as a surround, height, or front channel speaker in home theatre systems, and pairs tonally with the Spendor A1, A2, Classic 4/5, and Classic 3/1 stereo speakers. How is the Spendor AW1 different from the Spendor A1? The Spendor AW1 and A1 are acoustically identical — they share the same sealed enclosure, 150mm EP77 polymer cone mid-bass driver, 22mm fluid-cooled tweeter, 4.2kHz crossover, and all measured specifications. The sole difference is that the AW1 comes with a factory-installed tilt/swivel wall-mounting bracket rather than the A1's rubber feet for stand or shelf placement. This makes the AW1 the preferred choice for permanent wall installation in home theatre systems, while the A1 is better suited to stand or bookshelf use in a stereo listening setup. Both are manufactured to the same broadcast reference calibration standard. Can the Spendor AW1 be used as a front left and right speaker for music listening? The Spendor AW1 is fully capable of front left and right stereo music duties and is marketed by Spendor for this application in addition to surround use. Its sealed-box design, EP77 polymer cone, and A1-derived crossover produce the natural, musical presentation that the A-Line range is known for. Close-wall mounting actually benefits its bass performance compared to free-space placement — the wall boundary reinforces bass loading in the sealed enclosure, partially compensating for the distance from the room's acoustic centre. For critical stereo listening, pairing two AW1s on the front wall at appropriate height — with the tilt bracket aimed at the seated listening position — will produce imaging and soundstaging comparable to the A1 standmount. What is the bracket specification and how is it installed? The AW1's supplied tilt/swivel bracket provides +/-18° of vertical tilt (allowing the speaker to aim up or down from horizontal) and 180° of horizontal swivel (allowing the speaker to face any direction across a full 180° arc). The bracket attaches to the rear of the AW1 cabinet at the factory and includes all necessary hardware for wall mounting. The total depth from wall to front of cabinet is 261mm (186mm cabinet depth plus 75mm bracket clearance). The bracket is designed for permanent installation; for temporary placement or repositioning, the swivel range provides sufficient adjustment without re-drilling. What AV receiver power is needed to drive the Spendor AW1? The Spendor AW1 requires an amplifier or AV receiver rated between 25 and 100 watts per channel into its stable 8-ohm load. At 84dB sensitivity, it is straightforward to drive for a typical home theatre AV receiver — most mid-range and high-end AV receivers rated 50 to 100W per channel will drive the AW1 effectively in surround and height channel roles. The AW1's impedance never drops below 6.2 ohms, which is well within the capability of virtually all AV receivers regardless of manufacturer impedance restrictions. For front left/right stereo duties in a larger room at higher listening levels, a dedicated stereo amplifier or AV pre-power configuration of 50 to 100W provides more dynamic headroom. Where can I buy the Spendor AW1 in Buffalo, NY or the United States? The Spendor AW1 is available at Vinyl Sound in Buffalo, NY, USA, an authorized Spendor dealer serving customers across the United States. Vinyl Sound carries the full Spendor A-Line and Classic range alongside AV receivers, amplifiers, and complete home theatre systems. Contact the Vinyl Sound team for current AW1 availability, finish options, and guidance on matching the AW1 with compatible Spendor stereo and centre channel speakers for a complete system build. Show more