Spendor D7.2 Standard Loudspeaker

Vinyl Sound USA Verified independent store

→

Spendor D7.2 Loudspeaker at Vinyl Sound Buffalo, NY USA The Spendor D7.2 is a 2.5-way rear-ported floorstanding loudspeaker from Spendor Audio Systems (Huntingdon, England, UK), av ailable at Vinyl Sound in Buffalo, NY, USA. The more compact of the two D-Line models — hand-assembled in South Yorkshire and calibrated to broadcast reference standard — the D7.2 combines a 180mm EP77 polymer cone mid/bass driver, a 180mm Kevlar composite bass driver, and the proprietary LPZ (Linear Pressure Zone) 22mm polyamide dome tweeter in a slim 8"-wide asymmetric cabinet, covering 29Hz to 25kHz at a sensitivity of 90dB. Compatible with amplifiers from 25 to 200 watts into a stable 8-ohm load, the D7.2 delivers breathtaking clarity, agility, and dynamic transparency in a form factor that integrates into most listening rooms with ease. D-Line Engineering: Resolution Without Compromise The D-Line represents Spendor's forward-looking design philosophy, built around maximum transparency, resolution, and dynamic realism rather than the warmth and tonal richness of the BBC-heritage Classic series. The D7.2 is an evolution of the well-regarded D7, updated with a refined crossover, additional asymmetric cabinet bracing, and Spendor's Dynamic Damping technology applied to both the enclosure panels and the drive units. These changes leave the speaker's measured frequency response essentially unchanged from its predecessor but produce a substantially more composed and resolved sound — particularly in the high frequencies, where the previous version was regarded by some reviewers as slightly forward. The entire cabinet is built around a rigid, asymmetrically braced, vented enclosure with real wood veneer and magnetically retained grilles shaped to preserve the speaker's acoustic performance whether the grilles are fitted or removed. At the base of each cabinet is an integrated plinth with solid spike mounts that partially decouple the enclosure from the floor, improving stability and low-frequency clarity on hard surfaces. LPZ Tweeter, EP77 Midrange, and 5th Generation Twin-Venturi Port The defining visual and acoustic signature of the D7.2 is Spendor's LPZ (Linear Pressure Zone) high-frequency driver — a 22mm woven polyamide dome built around a stainless steel front plate that forms a damped acoustic chamber directly in front of the diaphragm. The front plate incorporates a phase-correcting micro-foil that equalises sound wave path lengths across the diaphragm surface, simultaneously generating a symmetrical pressure environment on both faces of the dome so the tweeter operates in a balanced, linear mode across its full bandwidth. The result is a tweeter with very wide, consistent off-axis dispersion, strong imaging focus, and excellent mechanical protection for the delicate dome. Below 3.2kHz, a 180mm EP77 polymer cone mid/bass driver — with cast magnesium alloy chassis, high-efficiency motor, and Spendor's proprietary bullet-shaped phase plug — handles the critical midrange frequencies from 900Hz upward. The 180mm Kevlar composite cone bass driver handles the lowest octaves in a dedicated bass section below 900Hz, its ultra-rigid two-part bonded cone assembly providing controlled low-frequency articulation to 29Hz. Bass loading uses Spendor's fifth-generation Twin-Venturi Linear-Flow port — inspired by Formula 1 diffuser aerodynamics — which fires into a recessed alcove at the cabinet base alongside the single pair of recessed binding posts, smoothly decelerating port air flow and minimising turbulence at high output levels. Key Features Spendor LPZ High-Frequency Driver: The proprietary Linear Pressure Zone tweeter uses a stainless steel front plate forming a damped acoustic chamber and a phase-correcting micro-foil to equalise diaphragm pressure and path lengths, producing linear, wide-dispersion high-frequency output with excellent imaging focus. 180mm EP77 Polymer Cone Mid/Bass Driver: Spendor's proprietary EP77 polymer formulation — combined with a cast magnesium alloy chassis and bullet-shaped phase plug — delivers low-coloration, high-damping midrange performance across the 900Hz to 3.2kHz range. 180mm Kevlar Composite Bass Driver: An ultra-rigid two-part bonded Kevlar composite cone in a dedicated bass section handles frequencies below 900Hz, providing tight, fast, articulate low-frequency reproduction to 29Hz. 2.5-Way Crossover Architecture: The D7.2's 2.5-way design assigns the EP77 mid/bass driver full mid and upper-bass duties while the Kevlar woofer handles only bass frequencies, a division that improves both midrange clarity and bass control compared to a conventional 2-way layout. 5th Generation Twin-Venturi Linear-Flow Port: Aerodynamically profiled twin-venturi port at the cabinet base — inspired by Formula 1 diffuser technology — minimises air turbulence and port-induced coloration at high output levels. Spendor Dynamic Damping Cabinet Technology: Applied to both enclosure panels and drive units, Dynamic Damping controls energy storage and resonance throughout the cabinet structure for a lower noise floor and greater transparency. Asymmetric Rigid Cabinet Bracing: Non-parallel internal bracing geometry reduces standing wave build-up inside the enclosure, complementing Dynamic Damping for a consistently inert cabinet under high drive levels. Integrated Decoupling Plinth: An integral base plinth with solid spike mounts at the outer cabinet edge provides rock-solid floor coupling and partially decouples the cabinet from the floor surface for improved low-frequency clarity. Broadcast Reference Calibration: Each D7.2 is individually calibrated and matched to broadcast reference standard at the Spendor factory, ensuring driver and crossover consistency within pairs. Technical Specifications Type 2.5-way rear-ported floorstanding loudspeaker HF Driver 22mm LPZ polyamide dome (Spendor proprietary) Mid/Bass Driver 180mm (7") EP77 polymer cone with phase plug Bass Driver 180mm (7") Kevlar composite cone Frequency Response 29Hz to 25kHz Impedance 8 Ohms nominal Amplifier Power 25 to 200 watts Sensitivity 90dB (1W/1m) Crossover Frequencies 900Hz, 3.2kHz Port Type 5th Generation Twin-Venturi Linear-Flow (base-firing) Terminals Single pair recessed precision binding posts Dimensions (H x W x D) 38" x 8" x 14" (965 x 203 x 356mm) excluding spikes Weight 46 lbs (21kg) per speaker Standard Finishes Cherry, Dark Walnut, Black Ash Premium Finishes Dark Gloss, Matte White Origin Hand-assembled in South Yorkshire, England, UK Sold As Pair Awards and Critical Recognition Hi-Fi Choice Five Stars — Sound Quality, Value for Money, and Build Quality (December 2019, Issue 456). Praised for its "svelte yet musical sound" and "classy styling." Frequently Asked Questions What is the Spendor D7.2? The Spendor D7.2 is a 2.5-way rear-ported floorstanding loudspeaker from Spendor's D-Line series, featuring an 180mm EP77 polymer cone mid/bass driver, an 180mm Kevlar composite bass driver, and Spendor's proprietary LPZ (Linear Pressure Zone) 22mm polyamide dome tweeter spanning 29Hz to 25kHz. Built and calibrated to broadcast reference standard in South Yorkshire, England, it is the more compact of the two D-Line floorstanders and is designed to deliver maximum transparency, resolution, and dynamic realism in a slim 8"-wide enclosure suitable for a wide range of listening rooms. How does the Spendor D7.2 compare to the Spendor D9.2? The Spendor D7.2 and D9.2 are the two models in Spendor's D-Line and share the same design philosophy, LPZ tweeter, Twin-Venturi Linear-Flow port technology, and Dynamic Damping cabinet construction. The key differences are in scale and driver layout. The D9.2 is a full 3-way design with a separately isolated midrange enclosure and dual 180mm Kevlar woofers, extending bass to 27Hz and weighing 77.2 lbs per speaker. The D7.2 is a 2.5-way design in a single enclosure, extending to 29Hz and weighing 46 lbs — considerably lighter, narrower, and more room-friendly. The D9.2 offers greater low-frequency power, dynamic headroom, and bass authority in larger rooms; the D7.2 delivers essentially the same high-frequency and midrange character in a package that suits medium-sized rooms more naturally. Both are rated at 90dB sensitivity and an 8-ohm load. How does the Spendor D7.2 compare to the KEF R7 Meta? The Spendor D7.2 and KEF R7 Meta occupy a similar price tier in the high-performance floorstander market but differ substantially in driver architecture and sound character. The R7 Meta uses KEF's Uni-Q point-source coaxial driver — a 1" aluminium dome tweeter mounted concentrically within a 6.5" aluminium mid/bass cone — with Metamaterial Absorption Technology to reduce tweeter distortion. The D7.2 uses a 2.5-way layout with physically separate EP77 polymer and Kevlar drivers, plus the LPZ dome tweeter with its damped acoustic chamber. KEF's Uni-Q geometry produces a wide, consistent off-axis dispersion pattern similar to a point source; Spendor achieves wide dispersion through the LPZ tweeter's micro-foil pressure equalisation. The D7.2's EP77 midrange has a warmer, more natural tonal character than the R7 Meta's aluminium cone, while the R7 Meta offers a more clinically precise, studio-monitor presentation. System matching sensitivity is higher on the D7.2 — bright electronics will be more audible through it than through the R7 Meta. What is the LPZ tweeter and why does it matter? The LPZ (Linear Pressure Zone) tweeter is Spendor's proprietary high-frequency driver, developed specifically for the D-Line series. It is built around a stainless steel front plate that forms a damped acoustic chamber directly in front of a 22mm woven polyamide diaphragm. The front plate incorporates a phase-correcting micro-foil that equalises the path length of sound waves across the full diaphragm surface — addressing the phase inconsistency that causes conventional dome tweeters to exhibit uneven off-axis response and compressed high-frequency imaging. Simultaneously, the front plate creates a symmetrical pressure environment on both faces of the dome, so the diaphragm operates in a balanced, linear mode across its full bandwidth. The practical result is a very wide listening window, exceptional imaging precision, and smooth high-frequency output without the forward edge that metal-dome tweeters can introduce. The stainless steel plate also provides mechanical protection for the delicate polyamide dome. What amplifier pairs best with the Spendor D7.2? The Spendor D7.2 is rated for 25 to 200 watts into a stable 8-ohm nominal impedance, with a 90dB sensitivity that makes it genuinely easy to drive. Its revealing, transparent character rewards careful electronics matching: clean, low-noise amplification from sources such as a Hegel H390, Naim Supernait 3, or Naim NAP 250 will allow the D7.2's resolution to emerge fully. What Hi-Fi? noted that the speaker requires careful system matching — bright or edgy amplification will be audible through it. The D7.2 is also tube-friendly for its price class, given its stable impedance curve, and pairs well with a quality 30W to 60W push-pull EL34 or KT88 integrated amplifier in medium-sized rooms. Spendor CEO Philip Swift has noted that the D7.2's Twin-Venturi port design significantly reduces the bass timing issues that challenge many amplifier-loudspeaker pairings. Is the Spendor D7.2 suitable for smaller listening rooms? The Spendor D7.2 is well suited to small and medium-sized rooms. Its slim 8"-wide cabinet has a minimal visual and acoustic footprint, and its base-firing Twin-Venturi port makes it less sensitive to rear-wall proximity than speakers with rear-firing ports. Reviewers have found the D7.2 works well with as little as 5 to 12 inches of clearance from the rear wall, and its asymmetric braced cabinet with Dynamic Damping produces bass that is controlled and fast rather than room-filling and boomy. The D7.2's 90dB sensitivity and stable 8-ohm load also mean it delivers satisfying output at low listening levels — an important practical advantage in rooms where domestic considerations limit volume. Where can I buy the Spendor D7.2 in Buffalo, NY or the United States? The Spendor D7.2 is available at Vinyl Sound in Buffalo, NY, USA, an authorized Spendor dealer serving customers across the United States. Vinyl Sound carries the full Spendor D-Line and Classic range alongside amplifiers, streamers, and cabling to build a complete high-resolution system around the D7.2. Contact the Vinyl Sound team for current availability, finish options, and in-store audition scheduling. Show more