Ensure full compliance with NYC Fire Code by clearly identifying your sprinkler control room. This sign helps emergency personnel quickly locate critical fire suppression system controls, improving response times and reducing risk. Ideal for commercial, residential, and high-rise buildings with sprinkler systems. Dimensions: 7" x 10" Materials: Printed Vinyl Mounted on to .03125in Aluminum What This Sign is For: The Sprinkler Control Room sign is used to clearly identify the location of the room housing fire sprinkler system controls, including valves, risers, and monitoring equipment. It ensures that building personnel and emergency responders can quickly locate and access critical fire protection infrastructure during an emergency. Legal Requirement Explained: Under the NYC Fire Code (FC §901 and §903) and applicable NFPA 13 standards, buildings with fire sprinkler systems must ensure that all system components and control locations are clearly identified with permanent signage.This requirement exists to:- Enable rapid FDNY response- Prevent delays in accessing sprinkler system controls- Reduce the risk of system shutdown errors during emergenciesProper identification of sprinkler control rooms is considered a critical life-safety measure. Who is Required to Post This Sign: - Commercial buildings- High-rise buildings- Multifamily residential buildings- Industrial and mixed-use properties- Any building with a dedicated sprinkler control room or area housing system controls Where We Recommend This Sign Be Posted: - On the exterior of the door leading to the sprinkler control room- At the entrance to the room containing sprinkler system controls- In a location that is immediately visible upon approach- Along access paths if the room is not easily identifiable Unacceptable Locations to Post This Sign: - Inside the room where it is not visible before entry- On adjacent walls that are not clearly associated with the room- Behind doors, equipment, or obstructions- In areas with poor lighting or visibility- Using temporary, faded, or non-durable materials- Anywhere that could delay identification by emergency personnel Recommended Height / Installation Requirements: - Install at eye level (typically 48”–60” above finished floor to centerline)- Must be clearly legible with high contrast lettering- Use permanent, durable materials (metal, rigid plastic, or equivalent)- Ensure the sign remains unobstructed at all times- If located in low-light areas, consider reflective or illuminated signage for visibility Disclaimer: This information is provided for general guidance based on commonly enforced NYC Fire Code and NFPA standards. Specific requirements may vary depending on building type, occupancy classification, and site conditions. Always consult with a licensed professional or the local Authority Having Jurisdiction (AHJ), such as the FDNY or NYC Department of Buildings, to confirm compliance for your specific project.
