Ergonomic, lightweight and the first Road bike handlebar from SQlab. In terms of material processing, weight and durability, we have already been able to prove that we are amongst the world‘s best in the field of MTB handlebars. In contrast to our MTB handlebars a 10° frontsweep is used which decreases towards the end of the handlebar. All contact surfaces are optimized in every detail, such as the Ergobar at the bottom or the small cutout on the outside for the little fingers. Ergobar: The Ergobar is an wave-shaped elevation on the underside. This results in a flat, slightly angular underside of the handlebar. Fits perfectly to the angled, bent fingers. Maximum Surface: The area which is flattened at the top and extended far forward is maximally large. This allows the fingersto safely enclose the handlebar and at the same time provides grip. Grip Security: The combination of contact surface and freedom of movement ensure the best possible pressure distribution. Angular and Areal: Thanks to the flattened outer surface, the handlebar is also pleasant to grasp in the lower grip and at the same time provides a secure hold in various riding positions. Di2 ready 312 R CARBON In terms of ergonomics, we rely in contrast to our MTB handlebars a 10° frontsweep is used which decreases towards the end of the handlebar. All contact surfaces are optimized in every detail. Frontsweep Numbness in the fingers is a common problem, which often arises from an overstretching of the wrist.In a neutral posture, our wrists are naturally straight.For arm positions that are wider than shoulder-width, for example when holding a MTB handlebar, we prevent an overstretching of the wrist through a backsweep.But for arm positions closer than shoulder-width, a backsweep would stretch the wrist again. That‘s why the 312 R has a frontsweep of 10°, to ensure a straight transition from the forearm to the hand. Angular and Areal Thanks to the flattened outer surface, the handlebar is also pleasant to grasp in the lower grip and at the same time provides a secure hold in various riding positions. Ergobar The Ergobar is a wave-shaped elevation on the underside. This results in a flat, slightly angular underside of the handlebar. Fits perfectly to the angled, bent fingers. Maximum Surface & Grip Security The area which is flattened at the top and extended far forward is maximally large. This allows the fingers to safely enclose the handlebar and at the same time provides grip. The combination of contact surface and freedom of movement ensure the best possible pressure distribution. Pressure Measurement The pressure measurement shows that the maximised contact surface of the 312R handlebars enables an even distribution of pressure on the hands.The pressure distribution is shown in colour: white means low pressure, from blue/green/yellow/orange to red the pressure increases. Handlebar width The individual handlebar width is decisive for an ergonomic position on the road bike and depends on the shoulder width.Schoulder width = Handlebar width Shoulder width = distance from the left to the right acromion of the shoulder. TEACHNICAL SPECIFICATIONS WEIGHT (G) 235 WIDTH (MM) CENTER TO CENTER (C-C) 380 AREA OF USE ROAD RACE REACH (MM) 80 CLAMPING (MM) 31.8 RISE (MM) 15 DROP (MM) 120 ART COMPACT GEOMETRY WITH ANATOMIC DROP UP- / DOWNSWEEP (°) 0 FRONTSWEEP (°) 10° ZU 2° MATERIAL CARBON CLAMPING WIDTH OF THE STEM MIN. 40MM - MAX. 58MM
