Physical color samples available. Please contact us for more information. Square Narrow Fountain Splash Guard Specifications: Available in 3 sizes - Sold separately Dimensions: 5.75": 4.25" W x 5.75" H | Base: 4.25" L x 4.25" W | Weight: 6 lbs. 7": 4.5" W x 7" H | Base: 4.25" L x 4.25" W | Weight: 7 lbs. 9": 4.25" W x 9" H | Base: 4.25" L x 4.25" W | Weight: 9 lbs. Shown in Greystone Due to the nature of concrete there is very little that can go wrong with it as long as it's properly cared for. For this reason Campania does not offer a warranty for their products. Our 15+ years of experience has shown that Campania's products are more than capable of withstanding the test of time. These products are designed to last well over 40 years, and will as long as proper care is provided for them. Square Narrow Fountain Splash Guard Features: Made of cast stone and copper mesh Can be used in many of our fountains to reduce/eliminate splash Made in the USA and available in various sizes and heights Designed to be used inside basins, above the water level, to diffuse splash Can be used as is or stained in any of Campania's patinas to match the fountain in which they are intended to be used Campania proudly manufactures its cast stone products in the USA using locally sourced materials. All of our cast stone pieces are manufactured using the wet casting technique with a proprietary high density cast stone mix, yielding a PSI strength of approximately 7,500. The mix is comprised primarily of water, sand, stone aggregate and cement. Our cast stone products may qualify for LEED credits as applicable to your project. Cast stone produces a strong and durable product that will weather naturally in an outdoor environment. Simply stated, cast stone is chosen for its beauty and authenticity. Our material is natural, authentic, made in the USA, and 100% recyclable. Campania has created a collection of cast stone and copper mesh splash guards which can be used in many of our fountains to reduce/eliminate splash. Manufactured at our facility in Pennsburg, PA and available in various sizes and heights, the splash guards are designed to be used inside basins above the water level to diffuse splash. The natural concrete splash guards can be used as is or stained in a patina to match the fountain in which they are intended to be used. If desired and in order to achieve the proper height, Campania offers a series of risers sold in sets of 3 to be used in conjunction with the largest square and round splash guards. Cleaning Instructions: Campania’s cast stone splash guards can be cleaned with diluted vinegar and water or with any commercially available mild detergent. Use a soft cloth, sponge, or brush. Do not pressure wash, apply corrosive cleaners or clean with anything abrasive. Note that it may take several cycles of wiping and drying before the planter is completely clean. Cast stone contains salts that may effloresce over time. You will notice a fine white powdery coating on the surface of the cast stone if the efflorescence is present in your product. If you wish to remove the salt deposits, Campania can recommend an appropriate an efflorescence cleaner. NOTE: The finishes are designed to replicate the look of natural aging, but unlike a painted finish, the patinas do not prevent the natural aging process. Any cast stone item with a patina finish will weather naturally in an outdoor environment. Because each patina is hand applied in a multi-step process and the product is photographed in natural settings, actual colors may vary.
