Square Towel Ring adds practical bathroom storage in a compact, finished profile. The Square Towel Ring from Grandmix is a clean rectangular loop in powder-coated galvanized metal, with three sizes from a compact 16-inch hand-towel to a 32-inch bath-towel scale. Available in 4 finishes (Black, White, Gold, Satine Nickel). Why It Works Rectangular geometry pairs with modern tile: Where a round towel ring fights with subway tile, hex tile, or rectangular wall panels, the square-loop silhouette echoes the geometry of the surrounding bath surfaces, a small detail that ties the room together. Three sizes for hand towel to bath towel: 16-inch suits a hand towel beside a sink; 24-inch holds a face towel; 32-inch accommodates a folded bath towel. Pick by what gets used at that location. Slim 3-inch projection saves elbow room: The shallow projection from the wall keeps the ring close enough to feel intentional without sticking into a narrow walkway or forcing awkward arm angles when grabbing the towel. Made for real rooms: The final form is kept practical to install, simple to clean, and easy to coordinate with the finish options above. Key Specs Dimensions: Three sizes (H × W × D): 16 × 7 × 3 in / 40 × 18 × 7 cm; 24 × 11 × 3 in / 60 × 27 × 7 cm; 32 × 14 × 3 in / 80 × 36 × 7 cm. Capacity: One looped towel ring (hand towel, face towel, or rolled bath towel depending on size) Material: Powder-coated galvanized metal tube, electrostatic finish Finishes: Black, White, Gold, Satine Nickel Weight: From about 0.5 kg / 1.1 lb at the smallest size Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight. Best placement: Bathroom, powder room, kitchen, mudroom What's Included Wall-mounted square towel ring (size and finish as ordered) Mounting screws and wall anchors Care instructions How to Use and Install Mark the two mounting hole positions on the wall using a level. The ring has integrated keyhole openings at the back of the wall plate. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the ring on the screws. Install takes under 10 minutes with a basic drill. Care Wipe the powder-coated metal with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; rinse off any salt-spray promptly. Frequently Asked Questions What size towel does each fit? 16-inch fits a folded hand towel or washcloth; 24-inch fits a face towel; 32-inch comfortably accommodates a folded bath towel. The looped design lets the towel slide easily on and off, so pick the size based on what you'll typically hang at that spot. How does it mount to the wall? Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations. Can it be installed in a humid bathroom? Yes. The powder-coated metal finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish. How do I match the finish to existing decor? Black works with matte-black, chrome, and modern monochrome fixtures; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic faucets, antique brass hardware, and luxury decor; Satine Nickel pairs with brushed chrome or nickel faucets and contemporary spa-style bathrooms. Match the rack finish to faucet, towel hooks, or cabinet pulls for cohesion. How do I clean the towel rack? Wipe the powder-coated metal with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.
