Compatible with the 1/18th scale 4M chassis. Our Re-Mastered SR Series Scale Truck is back and better then ever! We have dialed in the approach angle. We have, also have opened up the fenders to help fit larger tires, this model is now screw together cab and bed like all new models. Grill has been reworked and takes 3mm leds. Full interior still leaves plenty of room for electronics underneath, and the dash leaves room for you to install your own windshields and windows. Cab will come in the color you choose in either our standard or carbon materials. The parts will come in Carbon black, and are easily painted. MagSliderz mounting system has been completely re-worked. All of our 1/18 body's will use the same MagSliderz, and we now have 8 options: 🟢 0° for stock chassis or any chassis that uses a stock type skid and utilizes a 0° skid angle. 🟢 3.5° Angled Skid - recommended for Meus chassis 🟢 6° JEC EVO18 Specific 🟢 6.5° DBRC Gila 🟢 6-8° Angled Skid - Leved at 6° this is an additional option if using the full skid angle available on 6-8° chassis. 🟢 10° Juice 🟢 12° KingSnake 🟢 12° Barrage CR18 For gluing parts to the body, you can use a CA glue, or my favorite is Shoe Goe or e6000. The rubbery type glue helps with impacts and is also great for Magnets. CarbonFiber colors have a print quality increase, including higher temp and impact resistance. It also provides a textured matte finish, the raw prints can be painted without prep if desired. For normal paint preparation, we recommend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved before base coat. When choosing a color and planning to paint, you have options! You can pick the same color as your paint, so scratches will be less visible!Bodies do require prep if planning to paint. For prep we reccomend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved. ***All products are made to order. Please check the header on the main page for approximate lead times. Thank you for your support and patience - FlubRC Model shown is a raw print, in Carbon Denim Blue. This product or service is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services.
