Stain Reaper is a powerful, ready-to-use poultice paste specially designed to remove deep-seated stains, oil, dirt, harmful salts, and other stubborn contaminants from sensitive interior masonry surfaces. This professional-grade stain remover penetrates deep into porous stone to draw out embedded stains while helping restore the natural beauty of the surface. Safe for polished finishes, Stain Reaper is ideal for use on limestone, travertine, granite, marble, and other sensitive natural stone surfaces. Its convenient ready-to-use formula requires no mixing, releases no VOCs, and provides an environmentally responsible solution for professional stone restoration and maintenance. Key Features Powerful poultice paste designed for deep stain removal. Effectively draws out embedded oil, dirt, salts, and stubborn stains. Ready-to-use formula with no mixing or preparation required. Safe for polished stone finishes. Suitable for sensitive interior masonry surfaces. Works on limestone, travertine, granite, marble, and more. VOC-free and environmentally responsible. Easy application with professional-grade results. Helps restore the natural appearance of stained stone surfaces. Designed for use by stone care professionals and restoration specialists. Coverage Approximately 4–6 sq. ft. per pound, depending on stone porosity and stain conditions. Size 1 Pound Common Applications Removing oil stains from natural stone. Deep cleaning porous limestone surfaces. Restoring stained travertine. Removing dirt and embedded contaminants from granite. Marble stain removal and restoration. Interior masonry cleaning projects. Stone restoration and maintenance applications. Removing harmful salt deposits from sensitive surfaces. Residential and commercial stone care. Professional stain removal treatments. How to Use Surface Preparation Protect surrounding areas by covering or taping surfaces that should not be treated. Ensure both surface and air temperatures are at least 50°F. Do not apply in freezing conditions or when temperatures may drop below freezing overnight. Always test the product on a small, hidden area before full application. Application Lightly wet the stained area. Apply Stain Reaper in a 1/8–1/4 inch thick layer using: A trowel Airless sprayer Or another suitable applicator Dwell Time Cover the applied poultice with plastic film. Ensure the plastic clings tightly to the surface. Secure edges with tape. Allow the poultice to remain in place for approximately 24 hours. As the poultice dries, it pulls stains and contaminants out of the stone. Removal Carefully scrape away the dried poultice using: Corrosion-resistant spatula Trowel Non-metal scraping tool Remove as much residue as possible while avoiding scratches. Rinsing Rinse the surface thoroughly with fresh water. Use: Sponge Soft cloth Low-pressure water rinsing equipment Remove remaining residue completely. Repeat Application For heavy or stubborn stains, repeat the process until the desired results are achieved. Important Notes Do not apply on frozen surfaces or during freezing temperatures. Allow frozen surfaces to completely thaw before application. Always perform a small test area before treating the entire surface. Results may vary depending on stain type, depth, and stone porosity. Ideal For Limestone Travertine Granite Marble Other sensitive interior masonry surfaces Frequently Asked Questions (FAQ) Q1. What is Stain Reaper used for?Stain Reaper is used to remove deep-set oil, dirt, salts, and other stubborn stains from natural stone and interior masonry surfaces. Q2. Is Stain Reaper ready to use?Yes. It comes as a ready-to-use poultice paste and requires no mixing or preparation. Q3. What stone types can Stain Reaper be used on?It is suitable for limestone, travertine, granite, marble, and other sensitive interior masonry surfaces. Q4. Is Stain Reaper safe for polished stone?Yes. It is formulated to be safe for polished finishes when used according to directions. Q5. How does Stain Reaper remove stains?The poultice paste penetrates the surface and draws embedded contaminants out of porous stone as it dries. Q6. How long should Stain Reaper remain on the surface?The recommended dwell time is approximately 24 hours while covered with plastic film. Q7. How much area does Stain Reaper cover?Coverage is approximately 4–6 square feet per pound, depending on stone porosity and stain severity. Q8. Can Stain Reaper remove oil stains?Yes. It is specifically designed to pull out deep oil and other embedded stains from stone surfaces. Q9. Can Stain Reaper be used outdoors?It is primarily designed for sensitive interior masonry surfaces. Always test compatibility before use. Q10. Why choose Stain Reaper?Stain Reaper provides a professional, VOC-free, ready-to-use solution for restoring stained natural stone surfaces safely and effectively.
