Second Time Round range of Decoupage Design Weave. A high-quality product, all ready to apply to your painted surface. Surfaces including wood, metal, glass, plastic, tiles, canvas and many more homewares. All instructions are below. Any questions please email [email protected] or Pm us on our Facebook Page Second Time Round NSW. Happy creating. Decoupage Designs Application Instructions Let your creativity flourish with these versatile techniques! Preparing Your Decoupage Design Project: Unfolding and Straightening: Unpack your Decoupage Design and gently unfold it. If there are any creases, easily straighten them out by using a hot iron. Set your iron to a hot temperature with no steam. Place a piece of baking or parchment paper between the iron and the Decoupage Design, and iron until the creases are eliminated. Application Methods: There are two effective methods for applying Decoupage Designs: Water-Based Sealer Method: Apply a generous coat of water-based sealer to your project. Position the Decoupage Design onto the project, applying slight pressure from the inside out until it adheres. Adjust the placement if needed before the sealer dries. Seal over the Decoupage Design and let it dry. (Two coats are preferred) Once dry, trim the Decoupage Design using sandpaper in an up/down motion or a sharp blade to remove any excess. Iron-On Method: Apply a thorough coat of water-based sealer to your project, ensuring full coverage on all edges, and let it dry completely. Place the Decoupage Design in the desired area and cover it with a piece of parchment or baking paper. Use a hot iron (no steam) to iron only on the parchment paper. Seal over the Decoupage Design and let it dry. (Two coats are preferred) Once dry, trim the Decoupage Design using sandpaper in an up/down motion or a sharp blade to remove any excess. Tip: Ensure your project has a base colour due to the Decoupage Designs being slightly see through. To trim the Decoupage Designs efficiently, use sandpaper with a grit of 180-240.
