High-performance quad-core RISC-V single board computer (SBC) with an integrated 3D GPU StarFive´s VisionFive 2 is the worlds first high-performance RISC-V single board computer with an integrated GPU. This new generation has been fully upgraded with significant improvements in processor work frequency, multimedia processing capabilities and scalability. It glances with a quad-core 64bit SoC with RV64GC ISA with a clock rate of up to 1.5GHz. The integrated IMG BXE-4-32 MC1 supports OpenCL 3.0, OpenGL ES 3.2, and Vulkan 1.2 VisionFive2 provides as well a rich set of interfaces like M.2 connector, eMMC socket and many more. Technical Details: Processor StarFive JH7110 with RISC-V U74 quad-core with 2 MB L2 cache and S7 monitor core, supporting RV64GC ISA, working up to 1.5 GHz IMG BXE-4-32 MC1 with work frequency up to 600 MHz (400 MHz by default) Memory 4GB, 8GB LPDDR4 (up to 2800Mbps) Storage Onboard TF card slot Flash eMMC socket for optional eMMC module up to 128GB M.2 NVMe SSD slot Wireless Connectivity WiFi dongle (only for WiFi board variants) Video Output 1 × 2-lane MIPI DSI display port, supporting up to 1080p@30fps 1 × 4-lane MIPI DSI display port, supporting up to 2K@30fps in both single display and dual display modes 1 × HDMI 2.0, supporting up to 4K@30fps or 2K@60fps Camera 1x 2-lane MIPI CSI camera port, supporting up to 4K (3840 x 2160) pixels @30fps Encoder/Decoder Video Decoder supports up to 4K@60fps; Support multi stream for H264/H265 Video encoder supports up to 1080p@30fps and multi-stream for H265 JPEG encoder/decoder Peripherals 4 x USB 3.0 ports 40 Pin GPIO Header (28 x GPIO, I2C, I2S, SPI, UART) 2x RJ45 Ethernet Connector 3.5 mm Audio jack (4-pole stereo audio output) M.2 Connector eMMC Socket 2 pin fan header Micro-SD card slot for system boot and data storage Reset and Power Button Power Supply Power 5V DC with PD, up to 30W Power Connector USB Type-C port or 40-pin GPIO header Dimension 100mm x 72 mm Compliance RoHS, FCC, CE Connect to the StarFive VisionFive ecosystem here: rvspace.org STARTER KIT CONTENTS: NON WIFI VERSION Acrylic Protector including active heat management (FAN) Power Supply 5V6A with 1m USB-C mounted cable (EU/US variants) 16GB eMMC module eMMC to usd adapter for flashing firmware WIFI VERSION Acrylic Protector including active heat management (FAN) Antenna with uFL pigtail Power Supply 5V6A with 1m USB-C mounted cable (EU/US variants) 16GB eMMC module eMMC to usd adapter for flashing firmware
