THIS LISTED UJ HAS ONE FINE END + ONE COARSE END KNUCKLES. STEERING COLUMN SIDE AND STEERING RACK SPLINES WILL BE DIFFERENT. THIS COMBINATION IS USUALLY STANDARD FOR RHD VEHICLES AND WAS RARELY USED IN LHD. ! BEFORE BUYING ! Please make sure our UJ will fit into your vehicle. Brand New steering column linkage for BMW E30 conversion to BMW E36 / BMW E46 / BMW Z3 power steering rack. Ideal for M50 / M52 engine conversion.Perfect if you need extra header / exhaust clearance or just want to do away with the sloppy rubber bush while using your stock E30 steering rack! Yes, that's right! - our UJ is adjustable in length that is why it fits also stock E30 rack. Your BMW E30, E36, E46, Z3 Steering rack male shaft is always same - count spline is around 54 small tooth splines and diameter is 17.5mmTo fit this UJ, your steering column male shaft has to be also 17.5 mm diameter BUT count spline must be around 36 tooth splines.You will be able to see the difference in count spline (between the rack and steering column) just by looking at it. As long as you can see that steering column has less splines than steering rack and the diameter is same - it is all good! Measurements (see photo): A 255 mmA extended 295 mmB 230 mmB extended 273 mmC OD 27.7 mmD 43.2 mmE 91.3 mm Total length measured from end to end : CLOSED - 255 mmOPENED - 295 mmTotal length measured from bolt hole to bolt hole CLOSED - 230 mm OPENED - 273 mm Our yoke design (knuckle) and bolt fixing solution DOES NOT MAKE ANY DAMAGE to your column and steering rack splines. We know this things happen with shafts from competition. Please note that some pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.If you have any questions, concerns please do not hesitate to ask. As with any mechanical work associated with critical functions of your vehicle you make all modifications at your own risk and acknowledge that you are liable for any damages you might cause yourself. If you are not comfortable with making these modifications you should not attempt it. THESE UNI JOINTS ARE INTENDED FOR OFF-ROAD/TRACK USE ONLY. THEY SHOULD BE INSTALLED BY PROFESSIONALS.
Related
Related
Related
Related