An amplifier built for single cab classic trucks and two speaker systems, the Stereophonic 3-Channel amplifier powers your left and right speakers at 65-watts RMS per channel and sends 170-watts RMS to your subwoofer. For radios with only 2 inputs, set the Stereophonics input switch to 2 channel mode and the amplifier intelligently routes the selected inputs to all three balanced outputs. The Stereophonic is 2-ohm and 4-ohm stable and bridgeable, giving you more flexibility to build your system. The Stereophonic Class D (digital) amplifier allows you to listen to your favorite classic hits at higher volumes with little to no distortion, thanks to its low current draw and exceptional dynamic range. High-pass and low-pass filters let you fine-tune your audio for the best listening experience, with gain and bass boost controls to help dial in the perfect amount of bass. Features 3-channel amplifier Full-range Class D digital circuitry 65-watts RMS x 2 channels full-range @ 4 ohms 170-watts RMS x 1 channel subwoofer @ 4 ohms (229-watts RMS @ 2 ohms) Selectable input mode switch for 2 and 3 channel operation Bridgeable 2-ohm and 4-ohm stable Built-in variable low pass and high pass full-range filters Bass boost and gain control Advanced circuitry and thermal protection Easily connects to your RetroSound radio via RCA inputs Works with any aftermarket radio with low-level RCA outputs Dimensions: 9.4 in x 5.3 in x 1.87 in (24 cm x 13.4 cm x 4.75 cm) Optional Wiring Kit Simplify the installation of your RetroSound® Stereophonic amplifier with this convenient wiring kit that includes everything you’ll need to get your 3-channel amplifier installed. The RetroSound 3 Channel Amplifier Wiring Kit comes with: one 30 amp mini-ANL fuse and quality fuse holder, 13 ft (4 m) of 8-gauge red power wire, 5 ft (1.5 m) of 8-gauge black ground wire, 13 ft (4 m) of 18-gauge blue turn-on wire, two sets of RCA cables, two 8-gauge ring terminals, two 18-gauge butt connectors, and a hex key. Warnings:California Proposition 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Full-Range Power Output @ 4 ohms 65 watts RMS x 2 channels @ 4 ohms Subwoofer Power Output @ 4 ohms 170 watts RMS x 1 channel @ 4 ohms Full-Range Power Output @ 2 ohms 90 watts RMS x 2 channels @ 2 ohms Subwoofer Power Output @ 2 ohms 229 watts RMS x 1 channel @ 2 ohms Full-Range Frequency Response 40Hz - 65KHz Subwoofer Frequency Response 24Hz - 250Hz Total Harmonic Distortion 95dB Bass Boost 0-12dB @ 50Hz Input Sensitivity 200mV - 6.0 volts Crossover Slope 24dB High Pass Filter (HPF) Frequency Range 40Hz - 400Hz Low Pass Filter (LPF) Frequency Range 50Hz - 250Hz Fuse* (fuse door on bottom of amplifier) 30 amp ATC Style Dimensions (inches) 9.4” W x 5.3” D x 1.87” H Dimensions (cm) 24 cm x 13.4 cm x 4.75 cm *An additional 30 amp fuse (not included) must be used on the Battery (+) wire at the battery. The fuse must be placed as close as possible to the positive (+) battery terminal (within 6-8 inches away).
Related
Related