✨Small & Reliable Water Heating for Handwashing The Stiebel Eltron Mini™ tankless water heaters are designed for seamless installation right at the point-of-use. By heating water instantaneously as it flows through the unit, standby heat losses are completely eliminated. The highly efficient heating elements are controlled by a simple, responsive flow switch. For added peace of mind, all Mini™ water heaters come equipped with a safety high-limit switch featuring a manual reset. ✨ Included Features 📜 Code-Compliant Control: Thermostatic control ensures safety and compliance. 🚰 Endless Hot Water: Provides an unlimited supply of hot water tailored for handwashing. ⚙️ Adjustable Output: Easily adjust the temperature output between 86–122°F (30–50°C) via a potentiometer located right under the cover. 🚀 Booster Applications: The Mini™ model accepts a maximum incoming water temperature of 122°F (50°C), making it perfect for booster setups. 🏆 Proven Reliability: Built to last with Stiebel Eltron's trusted engineering. 🔍 Ultra-Compact Design: Extremely compact footprint allowing it to be mounted easily in plain sight. 🔄 Flexible Installation: Can be mounted either above or below the fixture with fittings pointing up or down. 🔌 Ready to Wire: Includes a pre-wired pigtail for straightforward installation. 🛠️ Easy Installation: Simple and hassle-free to install, Mini™ water heaters offer maximum flexibility—they can be located either above or below the fixture with water connections pointing up or down. Best of all, no pressure relief valves, drains, or circulating pumps are required. ⚙️ Mini™2-1 Mechanical Models 💧 Straightforward Dependability: Relying on a reliable, classic mechanical flow switch mechanism for instantaneous heating. 🧊 Inlet Water Constraint: Mechanical units are strictly suitable for cold-water supply lines only and cannot accept pre-heated booster water. ⚙️ Adjustable Output: Factory set to deliver water at 100°F (38°C), but easily field-adjustable by the installer between 86–122°F (30–50°C) via an internal potentiometer. 🏢 Versatile Applications The Stiebel Eltron Mini™ tankless water heaters are the perfect point-of-use solution for restrooms, breakrooms, or kitchenettes across a wide variety of settings. 💼 Commercial & Industrial 🏢 Office Buildings⛽ Gas Stations🛍️ Stores & Retail🏫 Schools & Universities🏬 Malls & Shopping Centers🏨 Hotels / Motels📦 Warehouses🏙️ Commercial Condominiums🍽️ Restaurants🏭 Manufacturing Facilities 🏠 Residential Settings 🧼 Bathroom Sinks🍽️ Kitchen Sinks🧺 Laundry Areas🌲 Small Cabins⛵ Boats / RVs 📊 Technical Specifications & Core Data Specification Details Dimensions 📐 6½" H x 7½" W x 3¼" D (165 mm x 190 mm x 82 mm) Weight ⚖️ 3.44 lbs (1.56 kg) Water Volume 💧 Mini™ 2-1 is internally restricted to 0.32 GPM / 1.2 l/min. Working Pressure ⚙️ 150 psi (10 BAR) Tested Pressure 🛡️ 300 psi (20 BAR) Water Connections 🚰 ⅜" O.D. flex connector or ⅜" compression fitting Voltage 🔋 120 V Wattage 🔋 1.8 kW Flow Rate Activation 🔋 0.21 GPM / 0.8 l/min ⚠️ Installation Safety Notes: Connect only to an electrical circuit protected by a Class A Ground Fault Interrupter (GFCI). Copper wiring must be used exclusively, sized properly to maintain a voltage drop under 3% under load. Do not connect any Mini™ series unit to a salt-regenerated water softener or a saltwater supply system. Overcurrent protection sized at 100% of load. Tankless water heaters are considered a non-continuous load. Mechanical units suitable for supply with cold water only. Thermostatic units can accept inlet water of 122°F. Warranty: Limited Warranty Technical Documents: Brochure Complete cross reference guide Care and Use Manual Technical Service Bulletin Engineering Specifications
Related
Related
Related
Related