Stiletto TRIMBAR5 9.5-in. Titanium Trim Bar Finish and Trim Puller
Key Features Solid Titanium Build The bar is made from solid titanium, so you get the strength needed for prying trim and pulling nails without carrying the bulk of a heavier steel bar on your belt. Light in the Pouch At about 5.4 oz., this trim puller stays easy to carry and easy to control, which matters when you're doing careful finish work for hours instead of rough demo for minutes. Made for Clean Removal The wide Japanese-style puller tip is built to get behind moulding and trim with less damage to finished surfaces, which is the whole point when the material needs to come off clean. Overview The Stiletto TRIMBAR5 9.5-in. Titanium Trim Bar Finish and Trim Puller is a lightweight pry bar built for finish carpentry, remodeling, and trim removal where control matters as much as force. This is a pry bar designed for pulling trim, moulding, and finish nails with less damage to the surrounding material. Model Number: TRIMBAR5. If you spend time removing casing, baseboard, or nailed finish material that you want to save, this tool makes more sense than reaching for a heavier flat bar meant for rough demo. What separates this trim bar from a standard steel pry bar is the combination of solid titanium construction, a wide curved moulding puller tip, and a very manageable carry weight. Stiletto lists the bar at about 5.4 oz., and that low weight matters more than it sounds like on paper. It rides easier in a pouch, feels less fatiguing in the hand, and gives you better touch when you are easing off delicate trim instead of ripping through framing. The business end is set up for finish work, not brute-force wrecking. The Japanese-style trim puller tip is wide enough to spread load better across the material, which helps reduce gouging and crushed edges on trim and baseboards. That is a real benefit for remodelers, painters, flooring installers, and finish carpenters who often need to pull material cleanly for reuse or for access behind the wall. There are also two finish nail pullers built in, so the tool handles more than just prying. Stiletto also uses an open truss design through the body of the bar. That keeps weight down without giving up the stiffness you need in a trim puller. On a hand tool like this, that design choice is not just about looking different. It makes the bar easier to carry every day and quicker to grab for punch-list work, trim corrections, and small demolition tasks where a full-size pry bar is overkill. For durability, the strike plate is built to outlast typical steel bars according to the provided product data, with better resistance to the kind of mushrooming and cracking that can show up after repeated use. That matters if you are tapping the bar into tight joints or using it regularly on site. Titanium is the big draw here: you get a strong hand tool with less recoil feel and less weight hanging from your belt. This Stiletto pry bar is a good fit for finish carpenters, remodelers, cabinet installers, painters, and serious DIY users doing detail work around doors, windows, baseboard, and interior trim. If your work is mostly rough demolition, you will probably want a larger, heavier wrecking bar. If your work leans toward clean trim removal, saved material, and lighter everyday carry, this is the smarter tool. Built for Finish Work, Not Just Demolition This Stiletto trim puller is aimed at the jobs where you want control and clean results, not just maximum leverage. The wide puller end and light titanium body make it easier to work behind moulding, casing, and baseboard without beating up the surrounding surface more than necessary. Wide curved moulding puller tip for easier trim removal Two built-in finish nail pullers for added utility on punch-list and remodel work Key Specifications Tool Type Pry Bar / Trim Puller Material Solid Titanium Length 9.5 in. Weight 5.4 oz. Puller Tip Width 1-7/8 in. Design Open Truss Body Built For Finish CarpentryRemodelingTrim RemovalMoulding WorkBaseboard RemovalPunch-List RepairsCabinet and Interior InstallDIY / Home Improvement Pro Tip When you're pulling painted baseboard or casing, work the wide tip in a little at a time across the length instead of trying to pop one section all at once. This bar is made for controlled separation, and that approach gives you a much better shot at saving the trim. Warranty & Support 1-year limited warranty. Tool Nut's Take Tool Nut's Take Stiletto TRIMBAR5 9.5-in. Titanium Trim Bar Finish and Trim Puller for Clean, Controlled Removal This is the kind of bar you buy when you are tired of using a demolition tool for finish work and paying for it in broken trim and a heavier tool belt. Who it's for: Finish carpenters, remodelers, installers, and homeowners who need to pull trim, moulding, and finish nails cleanly. Why it stands out: Solid titanium, very low carry weight, and a wide trim puller tip make it more precise than a typical flat bar. Worth knowing: This is a specialty trim and finish puller, not a big wrecking bar. If your work is rough demo all day, go heavier. If your work is detail removal, this is the right lane. Common Questions What kind of tool is this? It is a titanium pry bar and trim puller made for finish and trim removal, plus pulling small finish nails. Is it meant for delicate trim work? Yes. The wide Japanese-style puller tip is specifically intended to remove trim more cleanly and help reduce damage to trim and baseboards. Does it have nail-pulling capability? Yes. The provided product data states that it includes two durable finish nail pullers. Why choose titanium over steel for a trim bar? The main advantages called out in the product data are lower weight, strong durability, and reduced carry fatigue compared with a heavier steel bar.