30cm Long Extension perfect for packing with SPP, or Pall Rings to increase reflux action. The Create+ Straight Section is designed for use with 2” tri-clamp compatible distilling systems. The stainless steel Straight Section extends the column for enhanced reflux or integrates into a modular distilling system. Features: Connects to 2" tri-clamp distilling accessories 304 grade stainless steel construction High temperature resistant food grade silicone Includes: Straight Section 2" Tri-clamp 2" Silicone Gasket Specifications: Dimensions: H 30.0 cm x W 5.1 cm x D 5.1 cmWeight: 0.583 kgNOTE: The Still Spirits Boiler Lid and Alembic Dome are designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. The lid and dome are reasonably flexible and sturdy enough to fit components that are within the following specifications:- A total column & condenser height up to 1.1 m (3.6 ft) from the lid or dome.- A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg (4.4 lbs) of off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6”) to the main column. We recommend external support if:- Your column & condenser exceeds the above specifications.- The lyne arm is not vertical but angled or perpendicular running away from the column, resulting in significantly distant off-centre weight.- If the column & condenser is noticeably leaning. DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. INSTRUCTIONS: Insert Straight Section into your distilling system ensuring the silicone gasket is placed in the tri-clamp connection. Secure with a tri-clamp. CLEANING BEFORE USE: Rinse all components with fresh, clean water before the first distillation run. CLEANING AFTER USE: If needed, thoroughly rinse the section to remove any wash or debris. Use a non-scented brewery cleaner and a soft brush to remove any stubborn debris. CAUTION: After distillation is complete, the surface will be very hot. Allow to cool before handling.
