ULTRA II V2 The Ultra II V2 follows the legacy of the original Ultra 6, incorporating the use of technology pockets on opposing sides of the isolator. The Ultra II V2 is the first product to support the Version 2 filter and it is the only product that was built using just the Version 2 filter. There is no Version 1 Ultra II. It is available in these configurations. Ultra II V2 Standard:An LPI pad (smooth pad) on top and 1/4-20 threaded pad at the bottom. This version is recommended for attachment to the ESS X Grid, Rail Grid, or the Component Stand for supporting components. Available in sets of 3 or 4. Ultra II V2 ¼-20:An Ultra II V2 ¼-20 threaded pads at both top and bottom. This could be affixed to a component via the top pad with an appropriately sized adapter for the component being used. The Ultra II V2 or the Ultra II V2 ¼-20 can be used with the Ultra Base which adds 20% – to 25% more performance (ordered separately). Available in sets of 3 or 4. Note: The Ultra II V2 is not recommended for use under loudspeakers due to the small 6/32” screws holding the pad to the body. The preferred supports for loudspeakers are either the Ultra SS V2, the Ultra 5 V2, or the custom threaded Ultra 7 V2.
