StonePro Tile & Grout Sealer – Maximum Stain Protection Protect tile and grout from stains, dirt, spills, and moisture with StonePro Tile & Grout Sealer. This water-based penetrating sealer creates an invisible protective barrier without changing the natural color or appearance of the treated surface. It is suitable for a variety of tile, grout, natural stone, masonry, and concrete applications. Key Features and Benefits Maximum stain protection: Helps protect tile and grout from water, dirt, spills, and everyday staining. Natural-looking finish: Designed to protect without discoloring grout or noticeably changing the appearance of the surface. Water-repellent performance: Creates a penetrating barrier that helps water bead on treated surfaces. Suitable for multiple surfaces: Use on ceramic, porcelain, marble, travertine, limestone, granite, Saltillo tile, natural stone, concrete, and clay tile. Simple application: Apply using a brush, sponge, or sprayer, then remove excess product with a lint-free cloth. Interior and exterior use: Suitable for qualifying kitchens, bathrooms, showers, patios, and high-traffic areas when applied according to the manufacturer’s directions. Coverage and Availability Available sizes: Quart spray bottle and gallon Estimated coverage: 300–600 square feet per quart, depending on surface porosity and application Full cure time: Approximately 72 hours for maximum repellency How to Use 1. Clean the Surface Make sure the tile and grout are clean, dry, and free from wax, coatings, dirt, and debris before application. 2. Apply the Sealer Apply an even coat using a brush, sponge, or sprayer. Distribute the product evenly across the surface for complete coverage. 3. Allow the Sealer to Penetrate Allow the sealer to penetrate the surface for approximately 4–5 minutes. Reapply to areas that begin drying before the recommended penetration time. 4. Remove Excess Product After approximately five minutes, wipe the surface dry with a clean, lint-free cloth. Do not allow excess sealer to dry on the surface. 5. Apply a Second Coat if Needed Highly porous tile or grout may require a second coat. Follow the same application process and remove any excess product. 6. Allow the Surface to Cure The treated surface may be ready for light use after approximately 20 minutes. Allow up to 72 hours for a full cure and maximum repellency. Important: Test the product in a small, inconspicuous area before treating the entire surface. Follow all application, ventilation, handling, and safety instructions provided by the manufacturer. Product Documents View the StonePro Tile & Grout Sealer information sheet View the StonePro Tile & Grout Sealer safety data sheet
