400 Straps: This electric strapping machine is equipped with two 5000mAh batteries that can be swappedseamlessly. With a rapid 90-minute full charge, each battery supports up to 400 straps and withstands500 cycles and significantly improving workflow efficiency in high-demand environments. Operating Steps for the Electric Strapping Tool: Step1-Wake Up the Battery: Press the Weld Button until the indicator light illuminates, then lift the lifting handle.( This is a mandatory step before operation.) Step2-Insert and Tighten Strap: With the lifting handle raised, insert the strapping. Tighten it using the tension force rocker. Step3-Weld and Cut: Press the Weld Button. The tool will automatically weld and cut the strap. Step4-Release: Lift the lifting handle to complete the cycle. For PP and PET Strapping: This electric strapping machine handheld is engineered to handle straps ranging in width from 0.51" to 0.63" and in thickness from 0.016" to 0.047", compatible with both PP and PET materials. It is ideal for securing shipping cartons, reinforcing moving boxes, bundling construction materials, and stabilizing unit loads in warehouses. High-Performance Brushless Motor: This electric strapping machine with a strapping speed of 2.6iN/s and a powerful 2100N maximum tension. At the core of this electric banding tool lies an advanced brushless motor, ensures longer service life, reduced maintenance, and consistent high-power output Effortless and Time-Saving Operation: This Handheld Semi-Automatic Banding Tool is engineered to significantly reduce effort and time compared to manual methods. As a lightweight electric banding tool weighing only 4.85lb (without battery), it ensures operators can work comfortably over long periods without strain Preventive Measures: 1. Weak strap sealing Usually caused by insufficient sealing time. Before first use, adjust the sealing time via the button to find the optimal setting for strap material and thickness. 2. Slipping during strapping Regularly remove strap residue from the cutting gear. 3. Wear parts If slipping occurs, replace the tension wheel and magnetic plate promptly. If the strap cannot be cut, replace the blade immediately. Troubleshooting: 1. Do not run the tool without strapping—dry cycling damages internal components. 2. If dry cycling causes poor tensioning, install a shim at the tool base (see linked video). 3. The tension wheel is a wear part—replace regularly under heavy use. Daily Maintenance: 1. Clean residue promptly; 2. Do not operate the machine without strapping fed through; 3. Avoid dropping the tool from heights; 4. For extended storage, fully charge the battery, remove it, and keep it in a suitable environment; 5. Do not drain the battery completely before recharging (avoid deep discharge); 6. Use only plastic strapping — never steel strapping.
Related
Related
Related