To all the harpists out there who have struggled with the harper’s knot, we’ve heard your cries of frustration, and we are thrilled to finally be able to share The Harper’s NOT! We know tying the traditional knot with a slippery string and tiny spline is difficult or painful for many people, sometimes to the point of near impossibility, and that means a broken harp string can be a huge source of stress and anxiety. We’ve attacked this problem at various points over the years, looking for a string anchoring method that would be easier on the hands, would be relatively simple to use, and would hold firm without causing string breakage or loss of tone. It was a more difficult journey than we thought it would be, but we think String Buttons check all the boxes. Larger than a spline Infinitely reusable Can be threaded in a simple pattern without the need for tightly pinching with your fingers Won’t spring apart midway through the knot Makes use of the mechanical power of the tuning pin to cinch down the knot Fits nylon and gut strings up to .080"/2 mm on any make of harp (see FAQ tab for more details) A pack contains 12 black String Buttons, an instruction card, a link to the video instructions on this page, and an extra, quick-reference instruction card that you can keep handy or pass on to a friend. FAQs Do I have to replace all my string anchors with String Buttons? No. You can have a mixture of String Buttons and harper’s knots on your harp, and you’ll never be able to tell unless you look inside the soundbox. Will new Dusty harps come with String Buttons? No. We get daily practice tying the harper’s knot in our workshop, and it is faster for us to do than using String Buttons. We think they are a great resource for many people, but we won’t be changing how we string our own harps. Do they work with gut strings? Yes. String Buttons work with both nylon and gut strings, though see the next question regarding pedal gut. Can I use these on my pedal harp or my lever harp with pedal gut strings (like the Boulevard)? Yes, but if you are looking for low-stress, we recommend them only for the third octave and above. In our testing, strings in the fourth octave could be anchored with String Buttons, but it was not easy on the hands. With the heaviest strings (fifth octave), we found String Buttons to be more difficult than the standard harper’s knot. In addition, strings thicker than .080” or 2 mm will not fit through the holes. Why does it matter which way the logo faces? Because of the way the String Buttons are cut out and processed, there is a small chance that they could contribute to premature string breakage if flipped around. Make sure you can see the DS logo when you look in through the back of the harp! How large are they? String Buttons are 1/2" in diameter and about 1/8" thick. What are they made of, and do they buzz? String Buttons are made from black Delrin acetal, which is a hard plastic. Once the string is up to tension, the button is pulled so tightly against the back of the soundboard that it can't buzz. Just be sure to snip any long string tails!
