This product is discontinued. The new version is available here. This is a UV Glow Kit for the Nerf Stryfe blaster. This kit adds a couple of UV LEDs to your Stryfe Access door for a cool light effect and it allows you to shoot glowing darts. It is printed in glow in the dark PLA giving it a after glow effect after firing. It has 3 modes, off, always on, and on with rev. These LEDs are very bright and will charge up your glow darts for a tracer/Starwars-laser like effect. This kit makes Nerf Firefly tech mags completely obsolete. The UV Glow Kit is available in 4 versions depending on your Stryfe blaster setup.2S (7.4V) Version A: This is for a 2S setup with the Rev switch on the NEGATIVE line.2S (7.4V) Version B: This is for a 2S setup with the Rev switch on the POSITIVE line.3S (11.1V) Version A: This is for a 3S setup with the Rev switch on the NEGATIVE line.3S (11.1V) Version B: This is for a 3S setup with the Rev switch on the POSITIVE line.To install this, you will have to solder the Glow Kit in parallel with your motors. Then use a small amount of hot glue to affix the Glow Kit into the Access Door of the Stryfe.This is a 3D printed and hand assembled part so minor blemishes may be present. Every kit is tested before shipping to ensure proper functionality.What you get1 x Stryfe UV Glow KitBlackPrint Material: PLAPrint Resolution: 0.2mm*If you are not familiar with modding or soldering, do not purchase this kit. We are not responsible for any damage done to your blaster or this kit. Mod at your own risk.*Leaving PLA parts in high heat will lead it to warp.
