Stryker 10 Meter Radio - Stryker SR-955HPC+, SR-A10 Trucker CB Radio Antenna Bundle

CB Radio Supply Verified independent store

→

Stryker SR-955HPC+ Complete Truck Install Combo — Radio, Antenna, Mount, and Coax in One Kit The Stryker SR-955HPC+ Complete Truck Install Combo is a ready-to-mount 10 meter mobile package: Stryker's flagship 100+ watt PEP AM/FM/SSB radio paired with the factory-matched SR-A10 antenna, a Driver Extreme DRX-3402 heavy-duty stainless mirror mount, and an 18-ft DRX-1518 premium M213 coax jumper with PL-259s. Every part in this combo is pre-verified impedance-matched and mechanically compatible — no research, no adapters, no gambling on whether the coax you bought will handle 100 W PEP without loss. Open the box, mount it, tune the antenna, transmit. What's in this combo Stryker SR-955HPC+ 100+ Watt AM/FM/SSB 10 Meter Radio Stryker SR-A10 Trucker-Style 10 Meter Antenna Driver Extreme DRX-3402 Heavy-Duty Double-Slotted Stainless Mirror Mount Driver Extreme DRX-1518 18-ft Premium M213 Coax Jumper with removable PL-259 Who this combo is for This kit is built for the operator who wants one purchase, one delivery, one install. If you drive a Peterbilt, Kenworth, Freightliner, Volvo, Mack, or International tractor — or you're setting up a heavy-duty pickup or Class-A RV for 10 meter mobile work — this is the complete build. The SR-955HPC+ is the only Stryker HPC with SSB, so this combo makes the most sense for licensed hams who want DX capability on top of AM/FM local traffic. Every part is chosen because we install it ourselves in real trucks and know it holds up. License note: The Stryker SR-955HPC+ transmits on the 10 meter amateur band (28.000–29.700 MHz). Legal on-air transmit use requires at least an FCC Technician-class amateur radio license. Study through the ARRL. Why we picked these four products The SR-955HPC+ is Stryker's only HPC-tier radio with SSB, rated 100+ watts PEP on AM and SSB and 45 watts FM, with 55 dB carrier suppression clean enough to feed a linear amplifier without splatter. The SR-A10 is the factory-matched 10 meter tunable antenna Stryker designed to pair with this line — tunable, mirror-mountable, and short enough to clear most bridges. The DRX-3402 is a double-slotted stainless mirror mount built to fit most Class 8 mirror brackets and hold up to salt, weather, and freeway wind for years. The DRX-1518 is 18-ft of premium M213 double-shielded coax with a removable PL-259 — the right impedance and shielding for a full-power 10 meter run without pattern degradation. Buying these separately means matching four impedances and three connector types. We've done that work. What's included Component Part Number What it does Stryker 10 Meter Radio SR-955HPC+ 100+ W PEP AM/SSB, 45 W FM, 55 dB carrier suppression, dual digital echo, 7-color faceplate, upgraded NRC noise reduction, CTCSS/DCS, auto-calibrating SWR meter. Ships with factory 4-pin dynamic mic, power cord, mounting bracket, hardware, and 3-year Stryker warranty. Stryker Trucker-Style Antenna SR-A10 Factory-matched 10 meter tunable antenna. Mirror-mountable, adjustable whip, tunable across the 10 meter band. 2-year Stryker warranty. Driver Extreme Mirror Mount DRX-3402 Heavy-duty double-slotted stainless mirror mount. Fits most Class 8 mirror brackets. Stainless hardware included. Driver Extreme Coax Jumper DRX-1518 18-ft premium M213 double-shielded coax jumper with removable PL-259 connector. Rated for full 100 W PEP 10 meter runs. Stryker SR-955HPC+ — 100+ Watt AM/FM/SSB 10 Meter Radio The SR-955HPC+ is the top of the Stryker HPC line and the only member with SSB. Rated 100+ watts PEP on both AM and SSB, 45 watts FM, with 55 dB carrier suppression and 50 dB unwanted-sideband rejection. Chassis is 7-7/8" W × 2-3/8" H × 9-1/4" D, so it fits most Class 8 sleeper trucks with an overhead cubby or under-dash mount. Front panel gives you dual digital echo, variable talkback, six selectable Roger beeps, a 7-color selectable display with a 32-position dimmer, CTCSS/DCS tone codes, and an auto-calibrating SWR meter for reading your antenna after install. 3-year Stryker warranty. Stryker SR-A10 Trucker-Style Antenna The SR-A10 is Stryker's factory-matched 10 meter tunable antenna and our top pick for the SR-955HPC+. Tunable across the 10 meter band with an adjustable whip, short enough to clear most bridges on a mirror mount, and built to hold up to salt, rain, and freeway wind. Pairs with the DRX-3402 mount without adapters. If you also need a magnet-mount option for temporary installs, the SR-A10MM is our recommended magnet-mount variant. DRX-3402 Heavy-Duty Stainless Mirror Mount The DRX-3402 is a double-slotted stainless mirror mount built for the abuse a Class 8 tractor puts an antenna through. Double slots mean you can fine-tune the mount angle for windage and clearance without redrilling, and stainless construction means it will still look and work like new after two winters of road salt. Includes all mounting hardware. Fits most Peterbilt, Kenworth, Freightliner, Volvo, Mack, and International mirror brackets. DRX-1518 18-ft Premium M213 Coax Jumper The DRX-1518 is 18 feet of premium M213 double-shielded coax with a removable PL-259 connector on one end. M213 is the correct impedance-matched cable for a 100+ W PEP 10 meter run without loss — cheap coax will fine-work for receive but soaks talk power on transmit and shortens the effective radiated range. Removable PL-259 makes routing through firewalls and grommets easier: pull the connector off, run the coax, put it back on. Pro Tune & Alignment Don't forget to add the Pro Tune & Alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual. Combo FAQ Is this combo everything I need to install a 10 meter radio in my truck? Yes — with one exception. This combo includes the radio, antenna, mirror mount, and coax jumper. You still need a mirror bracket (usually already on the truck) and a way to power the radio. For power, wire directly to the battery through a properly-rated fuse. For a home base install, use a regulated DC power supply rated at least 25–30 A continuous. Is this combo cheaper than buying the four pieces separately? Yes. This bundle is priced below the sum of the four components at their individual retail prices. Do I need an amateur radio license to use this radio? Yes for transmit. The SR-955HPC+ operates on the 10 meter amateur band (28.000–29.700 MHz) and requires at least an FCC Technician-class license for on-air transmit use. Receive-only monitoring does not require a license. Will the SR-A10 antenna fit under most bridges? Yes. The SR-A10 whip is sized to clear typical highway overpasses when mirror-mounted on a Class 8 tractor. Always verify overall vehicle height with the whip installed before departure — bridge strikes damage antennas and mounts. Does the DRX-3402 mount fit my truck? The DRX-3402 fits most Class 8 mirror brackets used on Peterbilt, Kenworth, Freightliner, Volvo, Mack, and International tractors. If you're mounting to a non-standard bracket, measure the bracket slot and confirm compatibility before install. Why do I need premium M213 coax? Won't RG-58 work? RG-58 works, but soaks noticeable talk power at 10 meter frequencies over an 18-ft run. On a 100+ W PEP radio, cheap coax is the difference between "solid contact 400 miles away" and "readable, weak." The DRX-1518 is M213 double-shielded — correct impedance, low loss, built for the power this radio makes. Do you offer Pro Tune on the SR-955HPC+? Yes. Don't forget to add the Pro Tune & Alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual. How do I tune the SR-A10 antenna after install? The SR-A10 is tunable at the tip. After install, key up on a low channel (28.000 MHz), read SWR on the radio's built-in auto-calibrating SWR meter, then key up on a high channel (29.700 MHz). Adjust the tip length until SWR is balanced across the band — typically under 1.5:1. If SWR is high across the board, check ground bonding on the mount first. Will this combo work in my pickup or SUV? Yes, with the right mounting point. The DRX-3402 is designed for a mirror bracket, so it's ideal for Class 8 trucks and heavy-duty pickups with mirror brackets. On a pickup without a mirror bracket, a bed-rail or bumper mount may be a better fit — reach out and we'll help you spec the right mount. What's included in the box? All four products in their original packaging: the SR-955HPC+ radio (with factory 4-pin dynamic mic, power cord, mounting bracket, hardware), the Stryker SR-A10 antenna, the DRX-3402 stainless mirror mount with hardware, and the DRX-1518 18-ft M213 coax jumper. How is this different from the SR-955HPC+ Audio Combo? Different accessories. This Truck Install Combo gives you the antenna system (SR-A10 antenna + DRX-3402 mount + DRX-1518 coax) so you can get on the air. The SR-955HPC+ Audio Upgrade Combo gives you the audio system (DRX-9010 external speaker + DRX-6560 noise-cancelling mic) so you can hear and be heard clearly. Some customers order both bundles for a complete build. What's the warranty? The Stryker SR-955HPC+ carries a 3-year Stryker manufacturer warranty. The Stryker SR-A10 antenna carries a 2-year Stryker warranty. The Driver Extreme DRX-3402 and DRX-1518 carry our standard Driver Extreme accessory warranty. Warranty registration is automatic when you purchase from CB Radio Supply — no card to mail in. Where to buy the Stryker SR-955HPC+ Truck Install Combo Right here. CB Radio Supply ships the Stryker SR-955HPC+ Complete Truck Install Combo direct from Indiana with free UPS ground shipping. Every combo ships complete with all four products in their original packaging. Don't forget to add the Pro Tune & Alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual. Show more