Modular in its form and function, the Studio 6 Modular System is able to be stacked or placed side by side. This allows you to create a custom configuration as well as easily expand your evolving system. This lets you easily manage your power one case at time. The case construction is unique: Instead of the typical screws and brackets and butted corners of conventional cases, we used solid machined dovetail construction for a seamless contoured monolithic design. Typically the industry standard has been to cover the cases with Tolex or fabric. The problem with this is that it can tear or stretch. Our solution was to completely encase the case inside and out with a military grade ballistic coating. We decided to use 104hp Vector T-rails for the module attachment. The rails themselves have no slot for adding the nuts. They are simply removed by the user for adding or removing the attachment nuts. 20 M2.5 sliding nuts and bolts are provided for each rail. 80 for a 6U. Power is always of great concern to the user. Our solution is to offer the units unpowered or powered by the Make Noise Power System because of it high quality specifications and industry acceptance. • 104hp x 2 • Vector Sliding Nut Rails with M2.5 Hardware • 5 3/4 Inches / 146mm interior Depth • Make Noise Power Bus Board • Comes with Power Brick We strongly suggest you anticipate your power requirements at www.modulargrid.net . You will quickly see that the Enclave power board is more than adequate for almost all configurations that will fit in a 104hp 6u case.
