Specifications Conformable and flexible hybrid material. Designed for car wrapping (the smooth or medium curved surface). The thickness of the film: 0.10mmThe thickness of film with release liner: 0.26mm Type of film: Polymeric vinyl film (silver coating) with new air release channels Series: 180 series Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.Indoor life: 4 years when followed rules of application and useOutdoor life: 2 years when followed rules of application and use (Zone 1)Dimensional stability: shrinkage less than 0,20%Plastification: between 23%-31%Breaking Strength: 27.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04Light Ageing in UV Exposure:Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 48hPackage: Roll width 152 cm, length 18 m, weight 13 kg Install tips: Temperature: from +17°С to +25°С, usage from -55°С to +65°СTools: Standard squeegee with soft (wet) bufferConformability: smooth and medium curved surfaceDirectional: yesOverlap width: 3-4mm Post heating: 90 Celcius Disclaimer Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. One needs to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, too strong heating. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty. Сaution: Before purchasing and using, a customer shall determine the product's suitability for its intended use and should have experience in wrapping metalized films. The current film has a limited warranty for outdoor use on horizontal surfaces - up to 1 year. Actual performance depends on exposure conditions such as high temperature and pollution. We recommend using a steam vacuum or IRR heater for installation. The dry application only. Please refer to the TeckWrap Installation Guide for additional information.
