This is the replacement of the beloved Super Bee flight controller. There are two versions of this flight controller. This one comes with a built in VTX as well as an OSD chip for analog whoops. This flight controller comes stock, in the Mobula6 2024. This flight controller comes with the GNB A30 connector which will work with the BT2.0 plug. You can find the HD version of this flight controller right HERE! THE V2 BOARD IS THE SAME AS THE V1. IT JUST COMES WITH MOTOR PLUGS SOLDERED ON TO THE BOARD. Flight controller SuperX ELRS AIO 5-IN-1 Flight controllerMCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4Sensor:BMI270(SPI connection)Mount hole size: 25.5mm*25.5mmPower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESCBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G OpenVTX 0mw~400mw (MSP control)Built-in UART ExpressLRS v3.0.0Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 1175 Onboard 4in1 ESC Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)Support BLHeliSuite programmableFactory firmware: Bluejay v0.19.2Default protocol: DSHOT300Recommend ESC Startup power value to min1100/max1200 Onboard Serial ExpressLRS receiver Packet Rate option: 50Hz/150Hz/250Hz/500HzExpressLRS Firmware version: V3.0RF Frequency: 2.4GHzAntenna : Enameled copper wire antennaTelemetry output Power:
