Shipping Complimentary · U.S. Lower 48 & Canada Introducing the Surface Mount Rounded L Track - the perfect solution for securing cargo and equipment in your camper van. This innovative L track is designed to be strong, versatile, and easy to install, making it the ideal addition to your van conversion. Crafted from high-quality aluminum, this L track is built to last and can support heavy loads. The rounded design allows for smooth sliding of tie-down straps and accessories, while the surface mount installation makes it easy to attach to your van's interior walls or floor. The Surface Mount Rounded L Track is the perfect addition to any camper van conversion, providing you with a secure and flexible cargo management system. Whether you need to secure bikes, camping gear, or other equipment, this L track offers endless possibilities for customization. Installation is straightforward using the appropriate mounting method for your van’s interior surface. Mounting hardware is sold separately in packs of 12 tapered flat-head screws, and compatible L-track back framing is available for reinforced installations. Fastener quantity and backing requirements depend on the mounting surface and required load capacity. So why wait? Order your Surface Mount Rounded L Track today and start organizing your camper van like a pro! Planning your installation? Read our complete camper van L-track sizing and installation guide to compare profiles, calculate quantities and plan your reinforced mounting system. TEC Features: Versatile Design: Perfect for securing cargo, equipment, and accessories in your camper van. High-Quality Aluminum: Lightweight and durable construction for maximum strength and longevity. Rounded Profile: Allows for smooth sliding of tie-down straps and accessories. Surface Mount: Easy installation on interior walls or floor without recessing. Easy Installation: For a quick setup. Mounting Hardware: Sold separately in packs of 12 tapered flat-head screws. Fastener quantity and backing requirements vary depending on the mounting surface, installation method and required load capacity. For reinforced installations, compatible L-track back framing is also available separately TEC Specs: Material: High-quality aluminum construction. Length: 84 inches (2-pack). Profile: Rounded for smooth operation. Mounting: Surface mount installation. WARNING! Ignoring the following warnings may result in the track detaching from the vehicle, leading to serious injury or death. Ensure you do not exceed the maximum load limit for the L track system. Inspect and tighten all hardware regularly. Check the overall integrity of the track installation monthly. If you are unsure, submit installation plans or photos to [email protected] for evaluation before final installation or use. The van owner and/or installer assumes all risks associated with L track systems and/or components. FAQ'S . How long is each section of L-track? Each section is 84 inches (2134 mm) long. The track can be installed at its full length or cut to suit a specific interior layout. 2. What is included in the two-pack and three-pack? The two-pack includes two 84-inch sections of L-track. The three-pack includes three 84-inch sections. Select either the standard anodized or black anodized finish when ordering. Mounting hardware, back framing, fittings and end caps are sold separately. 3. Is mounting hardware included? No. Mounting hardware is sold separately in packs of 12 tapered flat-head screws. The required fastener quantity and backing method depend on the mounting surface, installation layout and required load capacity. For reinforced installations, compatible L-track back framing is also available separately. 4. Can L-track be installed on a wall or floor? Yes. Surface-mounted L-track can be installed on compatible interior walls or flooring. The mounting surface must be structurally suitable for the intended load and properly reinforced where required. Do not rely on decorative wall panels or thin flooring alone to support secured cargo. 5. Does surface-mounted L-track require recessing? No. This profile installs directly on top of the mounting surface and does not need to be recessed. Its rounded outer profile provides a clean finish and helps reduce exposed edges and snag points. 6. What fittings are compatible? The track is designed for standard L-track fittings and accessories, including compatible single-stud fittings, tie-down rings, cargo straps, mounting studs and storage accessories. Always confirm that each fitting is properly engaged and locked before applying a load. 7. What is the load capacity? The finished system’s safe load capacity depends on the track, fasteners, mounting-hole usage, backing structure, installation surface and direction of loading. Because every installation is different, a single working-load rating cannot be applied to every completed system. The mounting structure and hardware must be selected for the intended use. 8. How should L-track be attached safely? Secure the track to a structurally suitable surface using appropriate fasteners and reinforcement. Use compatible back framing or backing plates when the installation surface cannot safely distribute the intended load. Use a sufficient number of mounting points, follow an appropriate fastening pattern and inspect the installation regularly. If you are uncertain about the mounting structure or intended load, consult a qualified installer before use. 9. What is the difference between standard and black anodized finishes? Both options use the same rounded aluminum profile. Standard anodized: Natural silver aluminum appearance. Black anodized: Dark finish that coordinates with black interior panels, hardware and cabinetry. Anodizing improves surface durability and corrosion resistance. Normal wear may still become visible over time, particularly around fittings and mounting points. 10. Can the L-track be cut to length? Yes. The aluminum track can be cut using an appropriate metal-cutting saw and blade. Measure carefully, protect the finished surface and deburr all cut edges before installation. Avoid placing a cut through a mounting hole or too close to the final attachment point. 11. Are end caps available? Yes. Compatible aluminum L-track end caps are available separately. End caps provide a cleaner finished appearance and help cover exposed track ends. 12. Can Tec Vanlife install the L-track? Yes. Professional L-track installation is available through Tec Vanlife in Delta, British Columbia. Contact [email protected] to discuss the installation surface, reinforcement requirements, layout, pricing and appointment availability.
