Tap-caps are a breather tap fitted to a cap which is then used on a jerry can to pour or decant product safely and cleanly. Usually we make these using a specially formed cap (chimney cap) which the tap punches into. However, we can make tap-caps out of most caps so please ask if you have a particular cap that you wish to use. There are a wide range of tap-caps available with different tap colours and sizes as well as cap colours and sizes. Outlet rotates to orient in correct position. Flow rate is 70ml/second (water viscosity) for Aeroflow Taps . LLDPE body, PP spigot, natural rubber washer. Food grade with wide chemical compatibility. Use with clip-on nozzle (code 204676 (7&8*) to reduce outlet to 12mm if filling into a narrow opening e.g. spray bottles. Or use Smooth Flow Tap (12mm outlet) versions. For safety and to prolong the life of your taps we recommend always returning the container to the upright position when not in use. Flush tap with clean water when changing containers and more regularly if possible. Taps made by Worldwide Dispensers 58mm caps which fit Alto, VIP, EPI Passion Plastics and Forward Plastics jerry cans. For other sizes please see the tap-cap heading relating to each size. This is a common size in NZ and Australia. Please see NW50 Tap-Caps for European jerry cans.
