All systems include: 100 User-selectable switch legends (not shown). Eight user-programmable switches. Four 35A circuits and four 20A circuits. Waterproof, Solid State 125A Power Module. RGB Backlighting provides unlimited color options, using Color Picker on App. Daisy Chain up to 3 Switch Panels to One Power Module to allow control of your 8 outputs from up to 3 locations on your vehicle. Switches can be programmed for: On/Off or Momentary. Ignition or Battery Input. Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation. Memory Function. Master Mode, with the ability to turn multiple outputs On AND Off with one touch. Automatic Power-Up upon vehicle start-up. Two External trigger inputs can each activate up to four outputs (Active Hi or Active Low). Lighting outputs can dim from 100% to 10%, with the ability to dim during Flash or Strobe patterns. Sleep Mode for minimal power consumption. Color-Coded circuit wires. LED Input Status Indicators for easy troubleshooting. Time Delay Off function available for all circuits. Splash-proof switch panel with Polycarbonate overlay faceplate. Program and control the system from switch panel pad or smartphone. Bluetooth interface with FREE Apple or Android App. Battery Voltage Readout on App screen. No Fuses or Bulky Relay box. Built-In Bluetooth Module. Switch panel specs: RGB Backlighting provides unlimited color options, allows for exact matching to factory dash lighting. Built-In Bezel Style Switch Panel enclosure measures 4” L x 2” W x .375” H; includes concealed mounting hardware for factory-look installation. Orange LED switch indicators. 100 User Selectable Legends. Power module specs: 8 Outputs: 4 rated @ 35A, 4 rated @ 20A. 125A maximum rating. Waterproof and Solid State. 6”L x 3”W x .5”H (excluding connectors). LED Input Status Indicators for easy troubleshooting. Underhood rated 125° to -40°C. Kit also includes: 11’ of Communication Cable between Switch Panel and Power Module. Color-Coded Output wires. Wire harness with Waterproof, sealed automotive grade connectors. Power Cable with 125A inline fuse. Switches can be programmed to be: On/Off or Momentary, ignition or battery powered, flash, strobe, low voltage disconnect, and memorize previous settings. There is also a programming function to adjust the brightness of backlighting and indicator LEDs. Switch-Pros all new app: New features & improvements: Faster loading times: Programming is now stored within the app instead of the panel, allowing for quicker loading times. Updated aesthetics: The Switch-Pros app has an updated aesthetic to match the modern look of the product line. Ability to access 2 panels at once: The Switch-Pros app now gives users the ability to toggle between 2 panels at once. After enabling this feature in the settings, 2 tabs will appear at the tope of the screen with the panel names. Users can jump between these 2 connected panels without having to disconnect from either. Easier menu maneuverability: The settings menu now has "Back," "Next," and "Exit" buttons, allowing the user to maneuver the menu with ease. Additionally, the "Configure Switches" portion of the settings now has a submenu, allowing the user to jump directly to the desired function. Quick actions menu addition: The "Quick Actions" menu allows the user to operate their accessory with the strobe, flash, or dim function as a one-time use, without permanently programming it. This feature can be used in an emergency setting as an example. If a vehicle typically has a tail light they want to stay on steady, but in an emergency need it to strobe, the user can set this switch to strobe as a one-time use. this feature will be available with systems with a revision date of 4/7/2023 or later. Remember password feature: Users can check "Remember Me" and the app will remember the device. The user will not be asked for the password, unless it is changed in the settings. If Auto-Connect is enabled, and Remember Me is checked, the user will be able to connect and automatically log in. Ability to assign icons to virtual switch panel: the virtual switch panel now gives the suer the ability to set their switches as either text, or an icon. The icons offered are a selection of artwork from Switch-Pros' legends, allowing the virtual panel to replicate the appearance of the physical panel in corresponds with. Summary of programmed functions: The app now features a screen where all programmed functions are listed. This allows the user to view their programming, allow for easier troubleshooting, as well as allows for easy duplication of programming for installers. Auto-orientation: The Switch-Pros app will not automatically change orientation when the device is turned (given orientation lock is not enabled on the device). The new app is compatible with all Switch-Pros systems, no matter the revision or age, on both the Apple & Android platforms (some features may be limited).
