Overview Your turbo Tacoma, 4Runner or Land Cruiser spends its life battling heat. Our front mount intercooler swaps the restrictive factory unit for a bar and plate core that fills the entire grille opening, keeping intake temperatures in check no matter how steep the climb or how hot the desert sun. The numbers tell the story, we kept the OEM width, then added 11 mm of height and 16 mm of thickness for about a 9 percent bump in frontal area and roughly 16 percent more internal volume. The result is a drop in pressure from 2.4 psi to just 1.2 psi, which cuts turbo outlet temperatures by 48 °F and lowers post intercooler temps by 14 °F. Robust cast aluminum end tanks smooth airflow into and out of the core while shrugging off trail debris, each tank is CNC machined for perfect hose fit, then pressure tested to twice the factory boost level. The intercooler delivers proven performance with dyno results showing gains of up to 15.5 hp and 14.4 lb-ft of torque over stock. Peak output increased to 264.10 hp and 302.97 lb-ft, with improved response and efficiency across the entire RPM range. This is real, repeatable power you can feel on and off the road. Check out our blog for a full write up here: https://sxthelement.com/blogs/sxth-element-blog/proven-power-dyno-results-from-our-2024-tacoma-front-mount-intercooler Key Features Direct bolt on for 2024+ Tacoma, 2025+ 4Runner and 2024+ Land Cruiser LC250 Bar and plate core with about 16 percent more volume than stock Only 1.2 psi pressure drop versus 2.4 psi stock, reducing turbo outlet temps by 48 °F and post intercooler temps by 14 °F Cast aluminum end tanks for strength and smooth flow Dramatically lower intake temperatures for sustained power Retains all factory sensors, crash bar and active grille shutters Silver heat dissipating coating blends behind the grille and resists corrosion Developed, tested and proven on our in house fleet, full results coming soon Product Specs Vehicle Fitment: 2024+ Tacoma, 2025+ 4Runner, 2024+ Land Cruiser LC250 Core Volume Increase: ~16 percent Pressure Drop: 1.2 psi (OEM 2.4 psi) Construction: Bar and plate aluminum core, cast end tanks Finish: Silver heat dissipating coating Installation Time: ~1.5 to 2 hours
