Version 2.0 Tail Light Overlays Version 2.0 tail light overlays can be combined with the 1.0 or C-cut tail light overlays and rear sidemarker overlays. You can also run them alone. This covers the higher portion of the lens. It's a great upgrade if you want to transform the rear end of your vehicle. Looks great in the light and even better at night. NOTE: In the photos these are photo'd with the 1.0 overlays and rear sidemarker overlays. The first photo points to the area you will be receiving. AVAILABLE MATERIALS Dark Smoke - Standard dark smoke material. Made in Germany. Dark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA. Light Smoke - Standard Dark Smoke Stealth - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA. Dark Smoke Honeycomb - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Modified light pattern when lit. Made in the USA. Dark Smoke Carbon Fiber - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Modified light pattern when lit. Made in the USA. Dark Smoke Galaxy - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). A galaxy full of metallic flake in the light. Appears similar to standard dark smoke when backlit. Made in the USA. Red - Standard red material. Made in Germany. Yellow - Standard yellow material. Made in Germany. INSTRUCTIONS Clean the application and surrounding areas prior to applying. We recommend the following items for installation: Microfiber Detailing Spray or glass cleaner Soapy Water Heat Gun or Hair Dryer (optional) Make sure there is no wax on the lens. You can wet the back of the vinyl with a few drops of dish soap in a cup of water. This allows you to slide the vinyl around into the right position. Once you have found that position, use your fingers to push out the soapy water. Allow to dry. LOW heat can be used to dry out the vinyl quicker.
Related
Related
Related
Related