Convert your SunSeeker T3 to electric Extras Included: Pedal-assist extension Cable Locking parking brake levers Topeak Bar X-tender Eco-Tad rack-to-frame bracket Extra-long rack struts P-clamps for rack mounting Axiom Journey rear rack (for 9 and 20ah batteries) or 2-tier rear rack for 10ah batteries See details on the kit on video here: E-BikeKit™ Rear 500w Geared Hub Motor Conversion Kitwith 48 Volt Li-ion Battery Pack and Charger The E-BikeKit 500-1000w geared conversion kit is powered by an internal 5:1 planetary gear hub motor with clutch. The clutch in the geared motor offers zero drag when pedaling and not engaging battery power. This motor is more efficient, resulting in increased range (especially with "start/stop" riding), has more starting torque, and has greater hill-climbing ability than a Direct-Drive motor of equal power rating. The motor is also smaller in diameter for increased stealth and 3.4lbs lighter than the 500w direct-drive. Who's it for? This premium electric bike conversion kit system is for those that want the best of the best in performance, efficiency, weight, stealth and speed. Top speed is 28MPH! There is a 300lb total load limit so if you plan on more than that, look to a heavy-duty system. System Specs:Watts: (Nominal/Peak): 500-1000w (EBK 22amp controller)Top Speed: Approx. 26 MPH @48v in 26" wheelRange: 10-44 Miles *(see battery chart)Charge Time: 3-5hrs (0-100%) (depending on battery choice)Weight: 21lbs (9.5kgs)Performance: HighEfficiency: HighStealth Factor: High Lithium batteries provide a high level of performance for the duration of each discharge (unlike seal lead-acid where performance is diminished 1:1 as the pack is emptied).Lithium batteries have a much higher power to weight ratio than lead-acid and 5-8 times the number of charge cycles (how many times a rechargeable battery can be charged from 0-100%). The lithium option costs more initially ,but over time, the "cost-per-cycle" is about half the cost of lead-acid. Lithium packs also require less care as they can be left partially charged, and do not require immediate charging after each use. All batteries MUST be properly cared for during storage. Battery Choice: We offer 3 battery packs for this kit - the 9ah Li-Ion Shrink Wrapped battery is the lightest and smallest, at just 5.8lbs. The 20ah Li-Ion Shrink Wrapped battery is the longest lasting, with a 20-44 mile range. The 10ah Li-Ion Aluminum Case battery sports a rugged enclosure, carrying handle, and locks in place with a key. Model Weight Range Mount Style Cost 48v 9ah Shrink Wrapped 5.8lbs 10-22 Battery bag with velcro straps (included, rack not included) Base Cost 48v 10ah Alu 9.7lbs 12-26 Rear Rack (included) +$230 48v 20ah Shrink Wrapped 14lbs 20-44 Battery bag with velcro straps (included, rack not included) +$380 Choosing Your Wheel Size: You can find your wheel size written on your tire. Available size options for this conversion kit are 20". Acceptable tire widths for the E-BikeKit rims: 1.15"(29mm) - 2.25"(57mm). Learn More: Front vs Rear Wheel / Compatibility / Pedal Assist Compatibility Note: our kits include parts to fit a wide variety of bikes, but do not fit every bike without modification or extra parts. Our representatives are available to help with compatibility questions and make recommendations on additional parts that you may need. Shipping Note: Li-ion batteries are shipped separately from electric bike kits. Li-ion battery packs are shipped via FedEx Hazmat and are require a signature for delivery. You may receive your kit, battery and possibly the battery rack (if applicable), on separate days. MOTOR SPECS: Brand: Electric Bike TechnologiesType: Internally Geared (brushless, disc brake compatible)Power: 500w nominal / >750w@36v / >1000 @48vMax Torque: 75N-m @36v / 84N-m @48vMax RPM: 259 @36v / 320 @48vCable: 8" axle exit, 3-phase / 5 hall effectConnector: Round 8-pin 13/32" (10.4mm)Weight: 9.4lbs (4.26kg) Note: geared 500w “Performance” Motors feature an internal clutch to reduce drag, and can not read speed or mileage when not in use. BATTERY SPECS: Nominal Voltage: 48vNominal Capacity: 9Ah / 10Ah / 20Ah (0.2C)Battery Energy: 421Wh / 468Wh / 936Wh (Approx.)Dimensions: See tableTotal Weight: 5.8lbs / 9.7lbs / 14lbsCell Assembly: 18650-3.6v-13S 4P / 5P / 10PLife Cycles: 800-1000 cyclesMax. Continuous Discharge: 20A / 22.5A / 50A BMS Protection Current: 30A / 30A / 60ADischarge Cut-Off Voltage: 39vMax. Charge Voltage: 54.6vInner Resistance: 180mΩ / 180mΩ / 220mΩ Charge Time: 4 hours / 3 hours / 5 hoursOperation Temperature Range: Charge: 0’C---45’C / Discharge: -20’C---60’CStorage Temperature: 0’C---40’C (Extended Storage: 15’C-25’C;)Battery Case Material: Blue PVC Heatshrink / Aluminum / Blue PVC HeatshrinkAssembled Pack Certificates: UL; UN38.3; MSDS; RoHS; SGSManufacturer: Electric Bike Technologies **System includes battery carrying rear rack only when purchased with 48v10ah aluminum case battery. Otherwise includes battery bag. Every E-BikeKit conversion kit comes with all of the parts you'll need for your conversion. 1 x USA hand-built wheel w/ disc-brake compatible hub motor1 x 36/48V compatible 22amp 12FET controller1 x Programmable LCD Dashboard1 x PAS 12-magnet Split Disc1 x PAS Sensor Left side mount (right by request)2 x Throttles (1 Thumb & 1 Split-Twist)2 x E-Brake handles (left & right)1 x Motor cable1 x Accessory cable1 x Battery wire harness (kits w/o batteries only)1 x Freewheel (rears only)1 x Battery1 x Battery charger1 x Owner's manual w/ installation guide***Zip Ties, c-washers & torque arms in every kit! Extras for T3 Kit: Pedal-assist extension Cable Locking parking brake levers Topeak Bar X-tender Eco-Tad rack-to-frame bracket Extra-long rack struts P-clamps for rack mounting Axiom Journey rear rack (for 9 and 20ah batteries) or 2-tier rear rack for 10ah batteries
Related
Related
Related
Related