Cross Arm Gin, 56" (E-4) CROSS ARM GIN-56IN - 3.5X4.5 - 4.75-5.75, Yoke casting fits over distribution crossarms, so this Crossarm Gin can be used with rope blocks or handline to lift conductors from their insulators. A removable cadmium-plated steel pin provides adjustment for the crossarm from 3.5" x 4.5" up to 4.75" x 5.75". At a 30˚ maximum angle from vertical, the 44" gin has a rated working load including pull force of 750 lb.- 56" gin, 500 lb. Gins are not intended for applications involving side pull on either hoist line or load line. Lines to be within 5˚ of vertical. Yoke casting fits over distribution crossarms, allowing the gin to be used with rope blocks Can also be used with rope blocks or handline to lift conductors from their insulators Removable cadmium-plated steel pin provides adjustment for crossarm from 3-1/2” x 4-1/2” up to 4-3/4” x 5-3/4” Convertible model fits up to 6” x 6” crossarm At 30° maximum angle from vertical, 44” gin has rated working load including pull force of 750 lbs 500 lb. 56" gins are not intended for side-pull applications on hoist line or load line Lines to be within 5° of vertical
