Direct-to-Film (DTF) transfers are full-color heat-applied transfers for light and dark garments. No weeding or masking is required and DTF transfers can be applied to cotton, cotton/poly blends, and even 100% polyester. Simply press and go! All you need is a heat press! DTF Transfer Application Instructions 1. Preheat the garment for 5 seconds to remove excess moisture. Let the garment cool before adding the transfer. 2. Place the transfer on the shirt white side down, image facing up. Do not cover with a Teflon sheet. 3. Press at 310F for 10 seconds under med to high pressure. 4. PEEL HOT!! Remove the transfer film from the shirt right away. Rip it off. Do not go slow or "peek" if it's stuck. Rip off like a band aid. 6. Cover the image with Teflon paper and press again at the same settings. You can use a Teflon sheet, butcher paper, or tissue paper. ***Please note: If the image does not come off completely, repress with the image in place. UV DTF Can is a transparent 3D sticker that can go on any hard surface and is not applied with heat or pressure. Peel back carrier sheet off lay and squeegee on hard surface Peel at an angle like you do with regular vinyl NOT DISWASHER SAFE Please allow 2-3 business days for completion.
